1 / 4
Eufy SoloCam S340 Corner mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Transform your Eufy Solo Cam S340 into a versatile security device with this custom-designed 3D printed corner mount
- Rating
- 0 / 5
- Likes
- 34
- Downloads
- 257
- Makes
- 0
- Views
- 1,871
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Achieve optimal camera angles and maximize your surveillance coverage!
Transform your Eufy Solo Cam S340 into a versatile corner-mounted security device with this custom-designed 3D printed corner mount.
Make sure to use filament that can withstand outdoors!
Printing instructions:
- Calibrate your printer and add a brim of at least 10mm.
- When printing with ASA: Make sure to preheat your printer and use the highest possible temperature during printing.
- Pause printing at layer 53 and insert 3 M3 nuts in the provided holes. Ensure they are fully seated and flush with the surface.
- Resume printing to complete the model.
Mout / Install instructions:
- Retrieve the wall mount that came with your SoloCam S340.
- Attach the provided wall mount to the printed corner mount using 3 M3 bolts.
- Align the mount with your desired position and mark where you want to drill holes.
- After drilling and inserting the appropriate wall anchors, attach the mount to the wall using the holes in the print and clip on the camera.
Done and dusted!
Non-3D printed parts needed:
- 3x M3 Nuts
- 3x M3 Bolts
- Wall mount that came with your SoloCam S340