Parametric Pull / Lift / Hang Handles with screw holes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple handles designed to be screwed into things, easy to adjust in fusion.
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 116
- Wydruki
- 0
- Wyświetlenia
- 312
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These simple handles are designed to be easy to print and use for whatever pulling/lifting /hanging task you need. For hanging, mount them on the underside of something and use a coat hanger, rope, etc. A Fusion360 file and a STEP file are included to let you customize the handles as you wish, and I provide 3 sizes here (small/med/large) to get you started.
The holes are countersunk for US #8 screws by default (~4.2 mm diameter), but are easily adjusted in the fusion/STEP file if you wish.
The large size is shown here in pictures in Bambu Transparent Brown PETG, but should work well in most filaments.
Printing
I printed with the following settings for strength. Make sure to use common sense and test the load if you rely on these!
- 0.2 mm layer height
- 9 walls, 6 top / bottom layers
- 20% gyroid infill.
Adjusting
The design can be adjusted with a wide variety of parameters in Fusion360, the file for the MEDIUM size is included, but here are the different measurements for things I changed in the all 3 sizes i have here, in case you want to reproduce them easily:
There are of course even more customizable variables. Take a look at these and the sketch together and tweak it to how you'd like:
Main sketch:
