Parametric Pull / Lift / Hang Handles with screw holes
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple handles designed to be screwed into things, easy to adjust in fusion.
- Rating
- 0 / 5
- Likes
- 28
- Downloads
- 116
- Makes
- 0
- Views
- 312
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These simple handles are designed to be easy to print and use for whatever pulling/lifting /hanging task you need. For hanging, mount them on the underside of something and use a coat hanger, rope, etc. A Fusion360 file and a STEP file are included to let you customize the handles as you wish, and I provide 3 sizes here (small/med/large) to get you started.
The holes are countersunk for US #8 screws by default (~4.2 mm diameter), but are easily adjusted in the fusion/STEP file if you wish.
The large size is shown here in pictures in Bambu Transparent Brown PETG, but should work well in most filaments.
Printing
I printed with the following settings for strength. Make sure to use common sense and test the load if you rely on these!
- 0.2 mm layer height
- 9 walls, 6 top / bottom layers
- 20% gyroid infill.
Adjusting
The design can be adjusted with a wide variety of parameters in Fusion360, the file for the MEDIUM size is included, but here are the different measurements for things I changed in the all 3 sizes i have here, in case you want to reproduce them easily:
There are of course even more customizable variables. Take a look at these and the sketch together and tweak it to how you'd like:
Main sketch:
