Artemis (EIBOS) Extruder for Creality K1

Attention: Installation of this extruder requires certain skills. You perform all actions at your own peril and risk, and only you are responsible for them!

You will need: 
1* https://eibos3d.com/pages/artemis-extruder 1pcs

2* https://aliexpress.ru/item/33002003856.html?spm=a2g2w.orderdetail.0.0.4ac54aa6K6Cr0m&sku_id=66976277030 2pcs

3* https://aliexpress.ru/item/1005003497930762.html?spm=a2g2w.orderdetail.0.0.7ad44aa6hI6MWR&sku_id=12000026063312043  2pcs

4* https://aliexpress.ru/item/1005002109863123.html?spm=a2g2w.orderdetail.0.0.68c74aa6IR3WG3&sku_id=12000018775202479

5* https://aliexpress.ru/item/1005002109863123.html?spm=a2g2w.orderdetail.0.0.36ea4aa6pTcr2s&sku_id=12000018775202478

6* https://aliexpress.ru/item/1005001710197161.html?spm=a2g2w.orderdetail.0.0.63384aa6XcWfU1&sku_id=12000017245956152

7* https://aliexpress.ru/item/1005004431154591.html?spm=a2g2w.orderdetail.0.0.4ae64aa6sKpL2c&sku_id=12000029165072121

8* https://aliexpress.ru/item/32975242274.html?sku_id=66696774442&spm=a2g2w.productlist.search_results.7.918c2beeMRlLHk 1pcs

Recommended printing parameters for ABS GF/CF nozzle 0.4mm, height 0.1-0.14 width 0.4 (with supports)

When installing the two screws from the bottom to secure the heater to the heatsink, be careful not to damage the ceramic heater. You need to slightly grind down the sides of the screw heads, as the original screws have a smaller diameter. Insert two 2.5 mm bushings into the heatsink from the top, instead of the two PTFE tubes, and  not melt them into the carriage. First, install the heater assembly into the heatsink, and only after that secure the heatsink to the carriage.

I'm still testing the extruder, but I can say that it definitely prints well with flexible materials!

On a medium rigid TPU rod, when printing large parts, I managed to achieve stable printing with a flow rate of 8 mm3, on a hard TPU a95 like Kingroon or Esun, Stable printing with a flow rate 14 mm3