MinisForum MS-A1 backplate for full 15mm U.2 drive
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This backplate allows for the use of a full u.2 14mm drive with cooling holes on the MS-A1.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 555
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- GNU General Public License v2.0
This backplate was created to keep items from coming in contact with the exposed electronics while having a 15mm u.2 drive installed in the vertical orientation. If you use m3 standoffs you can keep the horizontal orientation as long as you leave room for air flow on the drive. I was lazy and didn't create all the screw holes. I have included the .obj if you want to add the additional holes for the screws.
I'm using PLA+ and it seems to be fine, the U.2 runs between 50c-60c but doesn't seem to be affecting the print.