1 / 2
MinisForum MS-A1 backplate for full 15mm U.2 drive — image 1
1 / 2

MinisForum MS-A1 backplate for full 15mm U.2 drive

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This backplate allows for the use of a full u.2 14mm drive with cooling holes on the MS-A1.

Rating
0 / 5
Likes
1
Downloads
40
Makes
0
Views
555
Reviews
0

Updated at source:

Model information

Category
Electronics
License
GNU General Public License v2.0

This backplate was created to keep items from coming in contact with the exposed electronics while having a 15mm u.2 drive installed in the vertical orientation. If you use m3 standoffs you can keep the horizontal orientation as long as you leave room for air flow on the drive. I was lazy and didn't create all the screw holes. I have included the .obj if you want to add the additional holes for the screws.

I'm using PLA+ and it seems to be fine, the U.2 runs between 50c-60c but doesn't seem to be affecting the print.