1 / 1
Rack Mount Enclosure for DMXKing eDMX4 PRO DIN
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fully enclose your eDMX4 Pro Din to convert it to a eDMX4 PRO
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 212
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
NOTE: This design was made before I got much better at designing for rack mounted components. As such, it's a bit… quirky. I'm leaving it here AS-IS.
Need a eDMX Pro on a budget? 3D print your own enclosure and convert a eDMX4 Pro Din.
- Print the Cover and Base
- Print either the Fascade or Fascade_Flat. This is not optional - in addition to labeling it, it adds reinforcement to the front by changing the orientation of layer lines.
- Fascade - Has a raised logo, works on all printers.
- Fascade Flat - For MMU / AMS multi material printers (shown in picture)
- Glue your chosen Fascade to the Base
- Install XLR connectors with M4 screws
- Install power jack through hole on Cover
- Install the eDMX Pro Din with M3x5 or 4-40 machine screws
- Assemble with M3x5 or 4-40 machine screws