1 / 1
Rack Mount Enclosure for DMXKing eDMX4 PRO DIN
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fully enclose your eDMX4 Pro Din to convert it to a eDMX4 PRO
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 22
- Makes
- 0
- Views
- 215
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
NOTE: This design was made before I got much better at designing for rack mounted components. As such, it's a bit… quirky. I'm leaving it here AS-IS.
Need a eDMX Pro on a budget? 3D print your own enclosure and convert a eDMX4 Pro Din.
- Print the Cover and Base
- Print either the Fascade or Fascade_Flat. This is not optional - in addition to labeling it, it adds reinforcement to the front by changing the orientation of layer lines.
- Fascade - Has a raised logo, works on all printers.
- Fascade Flat - For MMU / AMS multi material printers (shown in picture)
- Glue your chosen Fascade to the Base
- Install XLR connectors with M4 screws
- Install power jack through hole on Cover
- Install the eDMX Pro Din with M3x5 or 4-40 machine screws
- Assemble with M3x5 or 4-40 machine screws