SV08 LED Light Bar Adapter for Daylight on a Stick XXL
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This allows you to mount the Daylight on a Stick XXL to the SVO8. Bracket mounts in the stock LED location.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 1020
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Mount for the Daylight on a Stick XXL to the SVO8. Bracket mounts in the stock LED location.
Use two M3x8 screws to mount bracket to top hat in factory location of SV08 LED Light.
One M3x8 with M3 nut to mount XXL to bracket.
I connected the LED lights to the original connector by depinning it and crimping on JST XH pins to the metal factory pins. This allows removal and return to stock without any cutting or soldering.
NOTE: You have to swap the leads and make sure the polarity is correct. Both boards are clearly labeled for the 24v and GND.
Printed is Polymaker ABS Dark Grey @260c Bed 95C
Solid infill, but your choice. .4 nozzle .2, layer height, .4 wall thickness.
This mount is designed for the light bar pictured. There are similar ones but the bolt spacing is different, they have larger round LEDs.
Daylight on a stick XXL edition (370mm) PCB LEDs for 3D Printers (V2 / (west3d.com)