Liczymy pasujące modele…
NOCH IN BEARBEITUNG Hi, anbei habe ich eine Smarte Lightbar mit WLED erstellt. Nach dem Vorbild von govee und den anderen Herstellern. Benötigt werden ein Wemos D1 Mini, Ledstreifen (WS2812b) die zwei Druckteile und ein 5V Netzteil.…
Wydruk około 8,10 €–9,90 € nettoWstępna wycena jednego wariantu
The Ender 2 Pro spool holder, z-axis anti-wobble, and lightbar can be printed with the Ender 2 Pro. It barely fits but it fits. I will post a pic of the orientation up above in the picture section. I printed mine at 50% infill with PLA+…
This model is "Work in progress". All though it already works, I will post some updates and a full description in the future.
Add eye-searingly bright LED light strips to your Bastion 3-D printer. These holders are designed to accomodate up to 300mm of COB LEDs, but Neopixels should also work. The diffuser part is designed to use threaded inserts (M3xL4xD5) and…
I needed a clip for my motion activated lightbar for a drawer.
The model allow mounting a lightbar or a webcam on OLED monitors with 5 mm thick screens, with a curvature of 1800R. Printed in PLA, no special features needed.
Design Concept This eagle lightbox combines striking visual motifs with functional lighting for a stunning display piece. Purpose The eagle symbol is powerful and emblematic, making this lightbox perfect for both personal and decorative…
You need: MT3608 Micro USB Step Up Module (but i have the pop out port) LED Strip 12V (only need 15cm) Charger 5V + Cable if the case MT3608 doesn't fit, you can add width or just remove the port micro usb. this is use double foam tape to…
Voron Lightbar for better lighting. Can be split in the middle to be printed on the V0
I wanted a simple lightbar for my Sidewinder X1 so I created one. But this Lightbar can be used on any printer with a * x 40mm profile. I made 4 versions. 2 with a length of 50mm from the printer and 2 with 120mm. The width is 240mm for…
The LG34GK950G was too deep to support my Xiaomi Mi Computer Monitor Light Bar . Modeled to support the 1900R screen, and made tall enough to prevent the light bar support from hitting the rear RGB bump.
Here is a quick feature list: here is a quick preview: (6)Neo (@real_ne00) | TikTok Adjustable / dimmable light Any color (8 bit * 3) preset colors (just hold down power button) Over 20 good preset light modes SUPER good and satisfying on…
Hi, I designed an over hang style led light bar holder with wiring channel for Anycubic Kobra 3. It is more modular. You can have one long strip, multiple short ones or even front and back (as in picture). Material: PLA LED: 5V USB LED
Bugeye Zuma conversion to 6" LED lightbar. Will require a bracket behind it be cut or hammered to fit. Modeled for 6" Nilight LED lightbar from Amazon(link below). Included Blend file for headlight bezel as well as a bracket that fits…
This model consists of components that can be used to mount a lightbar on the ROP of a John Deere 1025R sub compact tractor. The design was to accomodate a lightbar wider than the straight portion of the ROP top bar via use of extensions…
this model is used to fit a led strip in front of your screen to light your desk, it is made for a vesa 100 mm screen mount (you don't need an arm as long as the monitor has screw holes) this is designed around a ender3 capabilities so…
I wanted to add LED lighting for the build area of my Tronxy XY-2 Pro. I like the looks and layout of the Creality Ender 3 S1 Pro, and since my Tronxy already has a Creality Sprite Pro extruder, I thought I'd continue its upgrades with…
I didn't like the look of the stock deadbolt lightbar, or without the light bar, so I designed this. This simply bolts into the original cage, and fills the space where the lightbar used to go. Category: Mechanical Toys
Hi, this is the second version of my Hue Play Lightbar mount. The first one started to sag a lot and I redid the model completly to now feature a hinge. Everything else pretty much stays the same, but you can now adjust the angle to…
This is my remix of this model, which was originally designed to combine the Xiaomi Mi Computer Monitor Light Bar with the Logitech Streamcam. While the original model was excellent, I needed a solution tailored for the Anker PowerConf…
I got an Ender 3 V3 KE in November 2024. I've been printing for years on other peoples printers both filament and resin, but the price of the machines and time it took was not where it needed to be yet back then. Now that it is I started…
This model consists of the light bar holder, which slots into the pre-existing mounting location for the clear hood. On it you can balance a light bar. I have not experienced the light bar being anywhere close to falling even with fast…
Sturdy brackets for those wanting to use their Philips Hue Lightbars for illuminating e.g. their workbench area. Single part 155 mm offset from the pegboard to get evenly distributed lighting on your working area. No additional materials…
lightbar has magnets on it so i used double sided tape and stuck magnets to inside of lightbar. then double sided tape to top of printer. no supports needed. PLA stock settings.
This little box is to fit the switch and connector for a lightbar in a previous build I did This work on the Ender 3 v3 plus
The model allow mounting a lightbar or a webcam on OLED monitors with 5 mm thick screens, with a curvature of 1800R. Printed in PLA, no special features needed.
This cover was specially designed for the Hue Play Lightbar. Its purpose is to block direct view into the lamp, which can be particularly useful when mounting the lightbar on the back of a desk. The cover is precisely tailored to fit the…
Lightbar for ender 3v2 neo with switch for 15mm aluminium profile.
Remixed dhananjaip's LED Light Bar Holder to mount the guide to the Z bar with clips rather than screws. I added the mount end to Zortium 3D's cable guide and added some additional cable guides. Reverse the object in the slicer for left…
Draft of a light bar mod. Useless but more RGB is always better :P
This is a remote cover for your Mi Lightbar remote. It is designed to make it look better, easier to use, and get rid of the stickiness that may happen after a while. You can print it with any filament, I chose matte PLA for the looks. It…
i made this off of my 98 Jeep Cherokee Xj. will fit a 97-01 XJs. My aftermarket headlights have blinkers integrated so i was able to remove them. The bracket is designed with full adjustment for a 7'' led light bar on amazon. see below.…
Philips Hue Play Lightbar Mount for IKEA Kallax Enhance your IKEA Kallax setup with this custom mount for the Philips Hue Play Lightbar . It simply slides over the top edge of a Kallax shelf and positions the lightbar to shine straight…
Remixed gantry mounted LED light bar for larger bedslinger printers. Made this to fit on a CR-10S, will probably fit many others. Needs two M3x6mm screws and two M3 T-nuts. M4 also an option, just drill out the holes a little. Also…
Wydrukowałeś mój model? Zachęcam do podzielenia się wrażeniami/zdjęciami na jego temat w zakładce realizacje/komentarze :) Każda opinia motywuje mnie do dalszego działania ;) Dziękuję :) Przedstawiam uchwyt do lampki na monitor Silver…
Wydrukowałeś mój model? Zachęcam do podzielenia się wrażeniami/zdjęciami na jego temat w zakładce realizacje/komentarze :) Każda opinia motywuje mnie do dalszego działania ;) Dziękuję :) Przedstawiam uchwyt do lampki na monitor Silver…
Here is the mount / holder for LED lightbar RGT-P860084 for mounting on the RGT Crusher rollbar. Use 2 screws to secure the lightbar into the mount, and the mount just clicks on the rollbar. I already did 2 expedition with it, got rolled…
Anet A6 lightbar for 5mm diodes (version with holes) or light strip (solid version) Print Settings Printer: Anet A6 Rafts: Doesn't Matter Supports: No Resolution: .2 Infill: 10% Notes: The railmount should be printed with the cutouts…
I wanted to add a 22" LED lightbar to my Z930M mower that was usable with the ROPS in the down position. I did not want to drill any holes. These mounts each use 3 36mm x 7mm cup magnets to attach to the front panel of the mower. The…
This is a simple light bar mod for AD5M. Attaches with 7pcs of 5x2mm magnets. I used basic 24V light strip bought from AliExpress, plus you need a 2-pin JST XH2.54 connector. Just solder positive and negative to the connector and plug it…
Design Concept This eagle lightbox combines striking visual motifs with functional lighting for a stunning display piece. Purpose The eagle symbol is powerful and emblematic, making this lightbox perfect for both personal and decorative…
I didn't like the mounts I found, so I designed this - uses less material than most. In hindsight, the fact that only gravity holds this in place might not be the best design choice, but it works well so far. Enjoy! Print Settings Printer…
Ghostbusters Trap Lightbar Box for 10 Segment Bargraph Category: DIY
Printer: QIDI Q2, LED strip width: 8 mm. Updated design of mounts for an LED strip. For proper operation, the original LED strip must be replaced with any available one. It is important that the strip is rated for 24 V. Print with…
You need: MT3608 Micro USB Step Up Module (but i have the pop out port) LED Strip 12V (only need 15cm) Charger 5V + Cable if the case MT3608 doesn't fit, you can add width or just remove the port micro usb. this is use double foam tape to…
Voron Lightbar for better lighting. Can be split in the middle to be printed on the V0
Yet another lightbar design for the prusa i3 MK3. Inspired by this design , though the implementation is original. I tried to make a simpler design which can be printed easily without much support. The OpenScad implementation is included…
I wanted a simple lightbar for my Sidewinder X1 so I created one. But this Lightbar can be used on any printer with a * x 40mm profile. I made 4 versions. 2 with a length of 50mm from the printer and 2 with 120mm. The width is 240mm for…
The Table Clamp: https://www.gravitystands.com/en/products/accessories/2918/ms-tm-1-b
The standard Creality Ender 3 V3 KE lightbar allows too much light into the eyes of a seated user. This shield slides over the lightbar and blocks the light from going into the users eye. Perfect fit and no more installation needed over…
The LG34GK950G was too deep to support my Xiaomi Mi Computer Monitor Light Bar . Modeled to support the 1900R screen, and made tall enough to prevent the light bar support from hitting the rear RGB bump.
Here is a quick feature list: here is a quick preview: (6)Neo (@real_ne00) | TikTok Adjustable / dimmable light Any color (8 bit * 3) preset colors (just hold down power button) Over 20 good preset light modes SUPER good and satisfying on…
The Kobra X is an awesome little printer but the lighting is super lacking! I decided to tackle that with a simple and effective led light bar. This model is now updated to version 2! Version 2 moves the mounting points or the lightbar…
Here is my design of a Lightbar for the Prusa MK2* & MK3(s). Features: LED's directly powered by the printer Wiring running inside the mount Integrated filament guides for both spool sides On/Off switch Directly wired to the Einsy board…
Lightbar for ikea skadis pegboard there's 2 variations for the arm: one with side hole for usb connector if you want to use a dc-dc boost converter. and one without V2: The hook is slightly wider for better attachment when adjusting the…
Designed to magnetically attach along the top of the AD5X chassis, above the X/Y axis travel rods. Uses minimal filament and avoids screws/screw mount bumps from the IFS. 6x2 magnets will fit, and glue is recommended to secure them. A 24V…
These holders clamp right into the Barrina lightbars but are loose enough to allow sliding or repositioning the light bar. I have used these with both Gorilla Glue and with screws and they function very well both in the garage and inside…
Personalize your Arrma Gorgon and illuminate the night with these chassis side mounted LED strip mounts for adding 5mm LED strips to your Arrma Gorgon. These will illuminated the area below the chassis, and also project light into the…
no support - holds generic LED bar on spool holder for creality ender3 all versions. use any generic led usb light bar and Zip ties, twist ties, tape, rubber bands or glue. quick, easy and effective. minimal print. minimal print. fast…
The adapter for 10x15mm flick switch. The .stl file of "Prusa i3 LED Lightbar with Filament Guide MK2 / MK3 / MK3S - Single Piece" by Nils Kal has wrong size of the flick switch opening (10 x 15mm specified in the text while 12,8 x 21,2mm…
LightBar holder Ender3v3 no support no support - holds generic LED bar on spool holder for creality ender3 all versions. use any generic led usb light bar. use small zip ties or twist ties to fasten to light bar.
This is a print in place clog charm. No supports. Yellow, black, red, and blue PLA filament. Total print time 42 min 28 sec on the Snapmaker U1 10.80 grams of filament including waste. Ironing on, and I adjusted my prime tower width and…
This is a custom mount for a AliExpress Lightbar on the GT3 You will need: This Lightbar (This Mount and cut it so it can fit): https://de.aliexpress.com/item/1005007626792034.html?s 2x M3 Heat inserts (For the Lightbar mount) 2x M4 Heat…
Even if you're in nature, good lighting is always appreciated in dark scenarios (for humans and mosquitos). What makes it even better, is not to worry about always carrying lights and lamps into your roof tent, because this lightbar is…
The replacement endcap fits the following lightbars: UKing 24*3W LED lightmaXX Vega BAR RGBW 24x 4W AFX BARLED18-PIX LED BAR 18 x 4W It is recommended to check the dimensions before to ensure that they match those in the technical…
Hazzah! Purpose and Theory: To redirect the absoutely insane amount of light bleed from my cheap light bar I purchased and help me from being blinded by the light if I wanna check my prints. This helps redirect the light on to the print…
I've modified the file of paintedgyp as the Lightbars I ordered from amazon was larger. Modified in Solidworks with the recognize function feature Supports are still needed for the printing (print on the side with the big hole facing up)
A simple handlebar mount for a 6in. light bar on a bicycle. Unless you have a weird stem or bars that bend super early, these should fit most if not all 31.8mm bars. I used a 2021 Giant Stance for fitment. Photos are from an unfinished…
EN: LED Lightbar for Prusa i3 MK2, MK25, MK3 This is an easy-to-snap light model for the printer frame. Note that there are differences in frame width of 5 mm on each side between the MK2 and MK3. For this reason, two sets of models are…
Printed with a “transparent” PLA since I didn't have any transparent PETG. I did a variable layer height so that I could sneak a thin layer of white PLA in there for better diffusion.
I bought a Traxxas summit 1/16 body and I did not have a front or a rear bumper, so i designed and printed some with lights. I also wanted a light bar on the roof, so desinged and printed that to. I also did not have any stickers for the…
Makes LED light bars you can screw or magnet to things. I put 5 minute epoxy over the lights to hold them in and protect them. Category: Electronics
This is a lightbar for the Traxxas Summit. it is a direct bolt on to replace the stock 2 led lightbar on the front bumper. Designed it to be able to fit 6 pc of led to the bumper, so you can have a nice light bridge. With a regular…
A simple but quite good looking Lightbar for Prusa Printers Print instructions Layer = 0,30mm No Raft/Support Switch: https://www.amazon.de/gp/product/B07BPQVQS2/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1 LEDs:…
This is a Lightbar designed for the Axial Scx24 C10, to be mounted on the roof using double sided tape or drilling holes to screw it on. It may fit other scx24s but haven`t tried it out. It was made to fit 5mm 1/10 lights with the metal…
Couldn't find a simple bracket to fit under cabinet led lights like the ones I had so I designed my own. Printed using PETG for extra flexibility on the clamp. Might work with PLA too. The light bars can be mounted with M3x12 counter sunk…
I Remixed alexVinarskis's lightbar model to fit my generic camera from Aliexpress (uses 1/4" mount). Print with 100% infill - otherwise, the screw might break. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports:…
it's just a remix of the original: https://www.printables.com/model/15259-prusa-mini-lamp-holder including an Prusa 30x30 T-Slot Nut with M5 thread You need one M12x5 screw
Remix of a remix to fit this under counter lightbar: https://a.co/d/aLcCabf ASOKO LED Under Cabinet Lighting for Kitchen with Touch Sensor, USB Plug in Under Cabinet Lights, 12 inch Under Counter Lights for Kitchen,Daylight White 4500K,…
This is an arm that you can used to attach your Philips Hue White and Color Ambiance Play Lightbar to the back of your desk. The angle can be adjusted to your liking. The ony thing that is required is a M3 screw to attach the Lightbar to…
Ich empfehle diese Antivibrationsfüße für die Kompatibilität. https://www.printables.com/de/model/115926-anti-vibration-feet-for-prusa-i3-mk3-mk3s-mk3s-pru
A 2-piece model of a Federal Signal Streethawk lightbar dome
Just a simple lightbar that clips in under the front lip of the AMS unit, providing light through the glass top into the X1 printer. Printed in two parts (due to length), it has columns that slide into the void space either side of the…
Yet another LED lightbar bracket for the Prusa MK2, MK2S, MK2.5, MK3 printer. Print instructions I really like having a LED lightbar mounted out in front of the extruder motor at the top of Z axis. I have been using one of the models that…
Die ist eine Wand Halterung für Govee Wandleuchte WiFi RGBIC LED Lightbar This is a wall mount for Govee Wall Light WiFi RGBIC LED Lightbar Print Settings Supports: No Resolution: 0.2 Infill: over 15%
I was using a lightbar with my Prusa MK3S+ but when I added the MMU2S the light no longer worked as it was. I already stuck the light to the light ring so I didn't want to remove it, so I printed an angle bracket to still be able to use…
This project is an upgrade to my previous lightbar work. It extends the edges of the lightbar to make for more comfortable printing with a printer at eye level, adds 2 new sizes (200mm and 100mm) for use with smaller print beds and…
I picked up a roll of Lumastrip LED strip locally for less than $10 and mounted it to the flat surface of this lightbar frame that I created. Since my Ender3 Pro bed is only 235mm, I needed to split the bar in half since the total length…
This Light-Bar design is inspired by the light of Ender 3 S1 Pro. LED is glued to a PVC Electrical wire duct and designed around it. Dimensions are given in the pictures. Power is taken from the Ender 3 Power supply itself with the help…
You can use the original Screw or a M3x10 to secure the Lightbar and then clip it on to the Alurail of your HFTEK Monitormount. The Hue Play Lightbar is angled at 45°.
This is a re-build/reworking of https://www.prusaprinters.org/prints/882-prusa-i3-mk3-led-bar-holder-v2/ . I needed a bar that would hinge out of the way for ease of access to the plate/extruder, so I reworked the original by Kenji and…
