1 / 3
Hue Play Lightbar Mount Prusa Mini(+)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hue Play Lightbar mount for the Prusa Mini (+). Attaches to the z-axis 3030 profile.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 1031
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (1)Kolekcje (32)Powiązane
Version 2 over here
Hi,
this is my first project with 3D-modelling and Fusion360, please be gentle.
I used the lightbar socket from myit on thingiverse (https://www.thingiverse.com/thing:4735701) to make my life easier.
The mount works perfect for me and the lighting the lightbar provides is awesome. The mount does sag a bit, which might also be caused by the mounting hole in the lightbar which seems to be at a slight angle. I've included the STEP-file if anyone wants to make some improvements and I'm open for suggestions.
You will need:
- Phillips Hue Play Lightbar (Base-Kit with power supply, an extension kit is not enough)
- the mounting screw that comes with a lightbar (is probably a M2x8 or something like that)
- 2x M5x16 Screws (non-countersunk)
- 2x M5 Drop-In T-Nuts (whatever fits the 3030 profile. I used some from Amazon, but the forces are not that big, you might also be fine with those: https://www.prusaprinters.org/prints/64627-3030-m5-drop-in-t-nut)
Print Instructions:
- No support or brim
- I used Prusament Jet Black PETG (ASA should also work, PLA would probably creep very quickly, because of the high torsion force)
- 0.2 layer height
- 25% infill (Gyroid or Cubic)
- 4 perimeter
- (I was probably way to cautious, less infill and perimeter is probably fine)