1 / 3
Hue Play Lightbar Mount Prusa Mini(+)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hue Play Lightbar mount for the Prusa Mini (+). Attaches to the z-axis 3030 profile.
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 55
- Makes
- 0
- Views
- 1,035
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Version 2 over here
Hi,
this is my first project with 3D-modelling and Fusion360, please be gentle.
I used the lightbar socket from myit on thingiverse (https://www.thingiverse.com/thing:4735701) to make my life easier.
The mount works perfect for me and the lighting the lightbar provides is awesome. The mount does sag a bit, which might also be caused by the mounting hole in the lightbar which seems to be at a slight angle. I've included the STEP-file if anyone wants to make some improvements and I'm open for suggestions.
You will need:
- Phillips Hue Play Lightbar (Base-Kit with power supply, an extension kit is not enough)
- the mounting screw that comes with a lightbar (is probably a M2x8 or something like that)
- 2x M5x16 Screws (non-countersunk)
- 2x M5 Drop-In T-Nuts (whatever fits the 3030 profile. I used some from Amazon, but the forces are not that big, you might also be fine with those: https://www.prusaprinters.org/prints/64627-3030-m5-drop-in-t-nut)
Print Instructions:
- No support or brim
- I used Prusament Jet Black PETG (ASA should also work, PLA would probably creep very quickly, because of the high torsion force)
- 0.2 layer height
- 25% infill (Gyroid or Cubic)
- 4 perimeter
- (I was probably way to cautious, less infill and perimeter is probably fine)