1 / 3
LED lightbar strip arms for 2020 (and larger) extrusion — zdjęcie 1
1 / 3

LED lightbar strip arms for 2020 (and larger) extrusion

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Arms to hold LED strips from the extrusion.

Ocena
0 / 5
Polubienia
8
Pobrania
36
Wydruki
0
Wyświetlenia
257
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I wasn't a fan of a lot of the lightbar arms around so I modeled my own and am pretty happy how they turned out. I made a long arm, 190.75mm long (170.75mm past the extrusion), that can hold two stripes and a short arm, 131.6mm long (111.6mm past the extrusion), that can hold one. The arms use M5s to mount to the extrusion (with t-nuts) and to the LED strips (I used ParametricFab's parametric lightbar for LED strips). The indents for the strips can accommodate a 16.5mm wide strip and I suggest using low profile cap screws. All screw holes have a 1.5mm recess for M5 LPHC screw that I designed to be printed without supports at 0.32mm layer height, smaller will work, ymmv with larger.

Tagi