LED lightbar strip arms for 2020 (and larger) extrusion
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Arms to hold LED strips from the extrusion.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 36
- Makes
- 0
- Views
- 257
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wasn't a fan of a lot of the lightbar arms around so I modeled my own and am pretty happy how they turned out. I made a long arm, 190.75mm long (170.75mm past the extrusion), that can hold two stripes and a short arm, 131.6mm long (111.6mm past the extrusion), that can hold one. The arms use M5s to mount to the extrusion (with t-nuts) and to the LED strips (I used ParametricFab's parametric lightbar for LED strips). The indents for the strips can accommodate a 16.5mm wide strip and I suggest using low profile cap screws. All screw holes have a 1.5mm recess for M5 LPHC screw that I designed to be printed without supports at 0.32mm layer height, smaller will work, ymmv with larger.