Traxxas summit 1/16 LED bumpers and Lightbar
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Front and rear bumper with LED lights and a roof lightbar
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 636
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
I bought a Traxxas summit 1/16 body and I did not have a front or a rear bumper, so i designed and printed some with lights. I also wanted a light bar on the roof, so desinged and printed that to.
I also did not have any stickers for the front fake lights, so i designed a thin “sticker” to 3d print and glue on. just mirror the light sticker i your slicer to get both sides.
I wired the front lights in a series connection so 6V from the reciever would not be to much volts.
The rear lights were also wired in a series connction but with a resistor in between the LEDs so the 6V would not destroy the LEDs.
5 mm LED.
I added a simple wiring diagram in the pictures.