1 / 6
Traxxas summit 1/16 LED bumpers and Lightbar — image 1
1 / 6

Traxxas summit 1/16 LED bumpers and Lightbar

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Front and rear bumper with LED lights and a roof lightbar

Rating
5 / 5
Likes
10
Downloads
51
Makes
0
Views
634
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

I bought a Traxxas summit 1/16 body and I did not have a front or a rear bumper, so i designed and printed some with lights. I also wanted a light bar on the roof, so desinged and printed that to.

I also did not have any stickers for the front fake lights, so i designed a thin “sticker” to 3d print and glue on. just mirror the light sticker i your slicer to get both sides.

I wired the front lights in a series connection so 6V from the reciever would not be to much volts. 

The rear lights were also wired in a series connction but with a resistor in between the LEDs so the 6V would not destroy the LEDs.

 5 mm LED.

I added a simple wiring diagram in the pictures.

Tags