Ford Tow Hitch Cover - Wildtrak and Everest Clips
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bracket to print your own logo of choice as a cover for the Ford Tow Hitch.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 467
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have designed a set of clips for the following vehicle's tow hitch brackets.
- Ford Wildtrak
- Ford Everest
The clips may work with other models, but I have not tested beyond the above-listed ones.
The clips may be attached to the provided logo plates or a customised plate of your own design.
Two logos are also provided
- Ford*
- Superman*
*The logos and any trademarks are not my own and belong to their respective registered owners. As such, they should not be sold without obtaining the right to do so.
I have included the 4 separate parts
- Ford Everest Clip
- Ford Wildtrak clip
- Ford Logo
- Superman Logo
I have also included a Bambu Studio prepared 3mf file with all 4 included on separate build plates.
The imaged prints were all printed using PETG filament.
PLA may warp in the outdoor heat, so it is not recommended.
ASA would most likely be best suited due to its UV-resistant properties.