Mobile Antenna Storage Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Storage for mobile CB or Amatuer Radio antennas.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 70
- Wydruki
- 1
- Wyświetlenia
- 317
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Currently being redesigned to improve the strength and layer adhesion! I advise you to wait a few days and use the new version!
I have a large collection of Amatuer Radio antennas for my vehicle all stacked up in the corner of the workshop. I like to change the one I use depending on what I'm doing but picking one out of the ever growing pile was difficult and often the entire stack would fall over so I designed this simple rack for easy home or workshop storage.
This rack is designed to hold 5 mobile CB or Amatuer Radio antennas and can be secured to a wall with screws or some strong 10mm wide double sided tape (like 3M VHB). You can also place labels on each section to identify the antennas.
- Standard version: Will hold antennas with a maximum base diameter of 26.5mm so should suit the majority of PL259, N type and BNC antennas.
- XL version: Will hold antennas with a maximum base diameter of 35.5mm so should suit all of the common antenna types PLUS most NMO antennas.
I printed mine in ASA but It should be fine in PLA.