1 / 2
Titania Extruder with 10mm OD bearing
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified Titania extruder to accept the bearings/gear from Titan clones (bearing 10mm OD x 6mm ID x 3mm)
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 79
- Wydruki
- 2
- Wyświetlenia
- 451
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (7)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (23)Powiązane
Modified Titania extruder to accept the bearings (and gear with 6mm shaft) from Titan clones.
Increased the bearing hole diameter from 9.2mm up to 10.2mm.
Titan clones use a bearing sized at 10mm OD x 6mm ID x 3mm.
The gear shaft on clones is 6mm in diameter (hence them using 6mm ID bearings).
The MR95ZZ models are the original unmodified design, they accept 9mm OD bearings.
The MR106ZZ models are the modified to accept 10mm OD bearings.
