1 / 2
Titania Extruder with 10mm OD bearing — image 1
1 / 2

Titania Extruder with 10mm OD bearing

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Modified Titania extruder to accept the bearings/gear from Titan clones (bearing 10mm OD x 6mm ID x 3mm)

Rating
5 / 5
Likes
12
Downloads
79
Makes
2
Views
451
Reviews
2

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Modified Titania extruder to accept the bearings (and gear with 6mm shaft) from Titan clones.

Increased the bearing hole diameter from 9.2mm up to 10.2mm.

Titan clones use a bearing sized at 10mm OD x 6mm ID x 3mm.

The gear shaft on clones is 6mm in diameter (hence them using 6mm ID bearings).

The MR95ZZ models are the original unmodified design, they accept 9mm OD bearings.

The MR106ZZ models are the modified to accept 10mm OD bearings.

Tags