1 / 3
Magnetic Shelf for Teenage Engineering KO II EP-133 / EP-1320 — zdjęcie 1
1 / 3

Magnetic Shelf for Teenage Engineering KO II EP-133 / EP-1320

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Magnetic shelf for Teenage Engineering's EP-133 / EP-1320

Ocena
0 / 5
Polubienia
7
Pobrania
19
Wydruki
0
Wyświetlenia
620
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Audio
Licencja
Creative Commons — Attribution — Noncommercial

This is a modified version of @AlastairGreen_326352's KO II Shelf to take magnets. I wanted to be able to mount it on the side of my server rack which is metal. It works great and has more than enough magnets to hold it. I also put some blue tape on the back because I dropped it and chipped a magnet, and I don't want it to potentially scratch the rack. No tape would be needed if the magnets aren't cracked.

Magnet size is 60x10x3mm and 6 is probably a bit overkill, but oh well. :)

Here is a plain, non-affiliated Amazon link to the magnets I used:

https://www.amazon.com/MIKEDE-Neodymium-Magnets-Double-Sided-Adhesive/dp/B0772PFC89?th=1

 

Thanks again to @AlastairGreen_326352 for a great design! Prints very easy, I used PETG, .4 nozzle, .2 layers, 4 walls, 25% infill.

 

Cheers and thanks for looking!

Tagi