Magnetic Shelf for Teenage Engineering KO II EP-133 / EP-1320
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Magnetic shelf for Teenage Engineering's EP-133 / EP-1320
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 19
- Makes
- 0
- Views
- 620
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial
This is a modified version of @AlastairGreen_326352's KO II Shelf to take magnets. I wanted to be able to mount it on the side of my server rack which is metal. It works great and has more than enough magnets to hold it. I also put some blue tape on the back because I dropped it and chipped a magnet, and I don't want it to potentially scratch the rack. No tape would be needed if the magnets aren't cracked.
Magnet size is 60x10x3mm and 6 is probably a bit overkill, but oh well. :)
Here is a plain, non-affiliated Amazon link to the magnets I used:
https://www.amazon.com/MIKEDE-Neodymium-Magnets-Double-Sided-Adhesive/dp/B0772PFC89?th=1
Thanks again to @AlastairGreen_326352 for a great design! Prints very easy, I used PETG, .4 nozzle, .2 layers, 4 walls, 25% infill.
Cheers and thanks for looking!