Articulated Bus - Easy print & build
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An easy-to-print articulated bus with snap-on wheels.
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 96
- Wydruki
- 3
- Wyświetlenia
- 410
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Standard Digital File License
My first upload, but not my first model. An easy-to-print articulated bus with snap-on wheels. Although this is a toy, it is not suitable for small children. This is because the wheels can fall off if you are not careful.
Key features
- Pre-supported
- Easy assembly
- Snap-on rolling wheels (as good as plastic against plastic rolls...)
- No external hardware required
It is designed the way I like a good print. No support (no visible, messy ones at least), easy assembly, and no external hardware required. Easy Peasy! Just snap on the wheels and start driving around.
How to print - IMPORTANT:
You won't need any support since I added the only necessary during the design stage. Just be sure to enable “detect thin walls” or what it's called in your slicer. Otherwise, the support probably won't print. See picture below. I suggest printing these in 0.16 top keep some of the smaller detail intact. Also, the articulation is not tested on other resolutions.
Do you have any suggestions on how to make it even better? Give me a shout!