Powkiddy V10 Slim Back Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A new back design which, along with a new battery, makes the V10 about 30% thinner and also flat backed
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 97
- Wydruki
- 1
- Wyświetlenia
- 1884
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted the V10 to be slimmer, so designed a new back. We lose the L2/R2 buttons (option to lose L1/R1) but get the device down to 16mm thick. Great for focusing on GBA.
Needs a new, slim battery and likely needs to solder the battery connector on it. I used the below amazon link, but found the same on ebay. If these continue to be sold out, you can search “306080 Lipo” and it will fit as the numbers are the battery size (3mmx60mmx80mm).
https://www.amazon.com/dp/B09FSXGXZT
https://www.ebay.com/itm/185933771857
Uses the same screws to screw in. Also have some covers to go over the L2/R2 buttons to prevent them from being pressed and raise the battery off from the chips on the board.
Use double sided tape (or similar) to stick battery to the inside of the back cover.