Powkiddy V10 Slim Back Mod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A new back design which, along with a new battery, makes the V10 about 30% thinner and also flat backed
- Rating
- 0 / 5
- Likes
- 23
- Downloads
- 97
- Makes
- 1
- Views
- 1,884
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
I wanted the V10 to be slimmer, so designed a new back. We lose the L2/R2 buttons (option to lose L1/R1) but get the device down to 16mm thick. Great for focusing on GBA.
Needs a new, slim battery and likely needs to solder the battery connector on it. I used the below amazon link, but found the same on ebay. If these continue to be sold out, you can search “306080 Lipo” and it will fit as the numbers are the battery size (3mmx60mmx80mm).
https://www.amazon.com/dp/B09FSXGXZT
https://www.ebay.com/itm/185933771857
Uses the same screws to screw in. Also have some covers to go over the L2/R2 buttons to prevent them from being pressed and raise the battery off from the chips on the board.
Use double sided tape (or similar) to stick battery to the inside of the back cover.