Counting matching models…
Like the LP2 and LP3, the LP4 has a sturdy handle on the laser head for transportation and handheld engraving. However, due to its weight and the loosely attached magnetic protective cone, it doesn't stand on the cone without the electric…
Oxlam handheld vacuum adapter allows for attachment of smaller tools. I can now use the inflation tools to vacuum fuzzy bits out of my sewing machine.
Yeah, you could buy one… but why not print it? This spinner is my new desktop fidgeting toy, it spins so well! The secret…? 6mm airsoft bb's. (ok, ok, I know it's technically cheating but they work so good! Let's just call it a Hybrid) I…
A very "special" Raspberry Pi handheld based off the 5 Inch DSI screen from Waveshare, a Pi 4, joycons and a few other choice bits. It's a chonker, thus the name, but if you happen to find the following parts you can make one too: 5"…
English: This 3D printable party sign features a changeable text area and ergonomic handle – perfect for events, photo booths, and table decoration. A full set of pre-designed signs is in development, along with a generator that lets you…
Beat the summer heat with style! The "PV Handle Fan" is a sleek handheld fan featuring an elegant leaf shape and decorative spade and heart cutouts. Whether you're out at a festival or just chilling in the sun, this compact fan makes a…
Retro Lite CM4: Raspberry Pi Handheld Link to official Source: GitHub - StonedEdge/Retro-Lite-CM4: A CM4 gaming handheld, designed with the Switch Lite aesthetics in mind. Contains all STL files and code to build your own landscape retro…
For me, the middle gear connecting to the cam did not move far enough down. So I redesigned the middle gear, try it if your handheld sewing machine stops working. Print at 45 degrees or it will break (PLA). Just open the machine up and…
ADDITIONAL PARTS NEEDED FOR ASSEMBLY: BEARINGS: 608 (16) 6808 (1) SCREWS (I used dome head): M5 X 30-60 (1) M4 X 20 (4) M3 X 4-8 (4) M3 X 24 (3) M3 X 30 (7) M3 X 30-40 (1) NUTS: M3 (10) M4 (4) ASSEMBLY SET PRINTING SETTINGS Infill 40 -…
Info - Depending on the used cell this fan can offer many hours of continued usage. - It has a flat bottom to put it upright on a table. - Motor angled at 20° so your fingers are not getting cut off quite as easily and it can be used as a…
NoiseGenerator – The Handheld Air Horn The NoiseGenerator is a small but mighty handheld air horn that was built for one simple reason: to make some serious noise. Whether it’s for a party, a prank, or just the joy of building something…
This is a custom 3D-printed handheld grip designed specifically for the Saramonic Blink 500 Pro B2 (or similar dual-transmitter wireless microphone systems) and its included deadcat windscreen . I created this to transform the compact…
This handheld controller was specifically designed for the 1971 arcade game Computer Space. The 12 pin IDC connector is compatible with CS backplane PCB that is available at...…
Recommended print settings: Material: PLA Layer Height: 0.20 Infill % : 15 Supports: No Print Orientation: Default as modeled. Brim : Recommended, Inside + Outside, 5mm Post Print Processing : Remove Brim Usage: Insert into the tip of the…
Great for people with small hands, with hands that tire quickly or people who are just generally unlucky at card games. This model's fit and function have only been tested to work with PLA filament printed on a Core One. Use caution when…
This is a 3D printable holder/stand designed to convert a 1x18650 power bank into a convenient handheld flashlight or lamp. The model is optimized for printing with PETG or PLA filament. Print it in the orientation shown in the photo,…
Pardon the two wacky Behringer add-ons in a row. This is a collar to make wind socks sit straight on the heads of handheld microphones. Takes only a few minutes to print and looks a lot better than I expected myself. Left mic: Behringer…
The holes are 3.6 mm in diameter and are intended for countersunk screws with a diameter of 3.5 mm. I printed it upside down with support for the overhang. See also the picture. Die Bohrungen sind 3,6 mm im Durchmesser und sind gedacht…
Two wall mounted pieces designed to organize this Zarimi Handheld Vac and its attachments (Amazon affiliate link). *Versions with "-B" were inspired by my 9 y/o nephew with a "slime-esque" mounting plate, because...kids :p I printed with…
Mounts with two screws to the wall Printed in PLA 70% infill
A unique 3D printable creation — this Handheld Citrus Juicer Reamer, Lemon Lime Orange, Ergonomic Handle, Juice Strainer Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File -…
This is a hand-held i-cord making tool. It was an early design when I was just starting to learn Onshape so it has a few deficiencies. In particular, the fit of the pin/socket retainers is a bit tight as I did not incorporate enough…
Description This is a fully 3D printable handheld vacuum cleaner , designed as a compact and modular DIY solution. The design integrates a 50 mm brushless motor , filter system, and a detachable dust collector, all housed in a clean,…
This wall mount attaches to any flat wall or wall stud using two screws. The mount has two recesses on the backside which accept center-bored magnets ( I used these ) up to 6.5mm deep and 35mm in diameter; while not strictly necessary,…
Have you ever dreamt of shooting in 720x576 ? Probably not. But here it is anyway. This project fits an Analog FPV Camera and a DVR board in a 3d printed enclosure based 1:1 on a Gopro Session, allowing for handheld, retro style Analog…
Super basic holster / case for the XU Retro XU20 V32. No retention or clips, just slides in and out. Main purpose is to prevent crushing when in my backpack. Does have cut outs for your fingers to grasp and also slight cut outs for the…
Could only find holders for the rounder style bidets, so I made my own since I hate the magnetic holder provided with the Bio Bidet Pearl handheld, it barely works and it falls off the magnets constantly, this one supports it better. I…
Adapted to fit the CosyCosi handheld jet air blaster from amazon. holds 2 attachment nozzles and allows charging while docked. fits HSW (Honeycomb Storage Wall) Link to the product.
Design Concept This handheld puzzle toy features a multi-color design to stimulate children's cognition and interest, while developing color recognition skills. The layout of the game pieces encourages players to exercise logical and…
hi, i was looking into printing a stand for some handhelds i have that are either thick or just have a usb c port on the bottom, couldnt find one i really liked or fit all so i took this one i really liked and just added a spot to put a…
Turn your DJI Mic Mini into a comfortable, professional handheld microphone with this custom-designed grip. This ergonomic handle is designed to give your compact wireless mic a natural handheld feel, making it ideal for interviews,…
Handheld tape dispenser, which is based on an empty Prusament spool or spools from other companies as well. The best fit is with the original Prusament spool and when printed using Prusament PETG settings. Other spools, such as the Sunlu…
Print with supports under the brackets Can be printed in PLA or PETG
Simple holder to hang electric bug zapper swatter using command strip. Single layer parallel electrode style.
Organize your sewing-tools with this piece of printed plastic. This is the sewing-machine, I designed this thing for: https://www.amazon.de/gp/product/B0CGRF14P9/ref=ppx_ I atteched the skp-file, so you can change this thing with sketchup…
Display your R36S retro handheld on your honeycomb storage wall for easy access. Printed in PETG
This is a model of the connector part of Xiaomi Mija handheld vacuum cleaner accessories. It can be used to create custom ones. The push-button part that locks the connector in place is designed to be compliant enough to not require a…
First of all, this guy is awesome. If you care about finding the most effective tool for a given job, see if he's reviewed the type of tool you need. His scissors comparison video is literally insane, in the best possible way: Based on…
Printed on its back for a faster print. Supports recommended.
Better Buttons for the R36s Handheld with tabs, so they don't rotate anymore in the case. Made in 4 Styles: blank Nintendo stlye ABXY Playstation Playstation bold I printed them in smokey black ABS-Like 3.0 Resin by Elegoo on a Anycubic…
I editet the original D-Pad to give it a more nintendo style and smotthed the edges a little bit. Also made two versions inspired by PlayStation D-Pads. I printed it in smokey black ABS-Like 3.0 Resin by Elegoo on a Anycubic Photon S at…
This is a Gaming Stand for almost all handheld devices, be it from nintendo, playstation or other. I've used for both my psp and nintendo ds collection and it hasn't failed me once. It doesn't need any kind of support or platform for…
An updated version of my other scanner stand, this one accommodates more devices, especially those with larger belt clips. No supports required, I printed with PLA+, 15% infil. Note: I have edited the model slightly since the photo to…
you ever need a good scratch, but your nails aren't doing it for you. Well, think no more with this very short and easy print you can get rid of that scratch in seconds. recommend PET-G or ABS for strength when scratching.
Simple model to demonstrate interaction between Sun, Earth and Moon. Here is the short assembly video Print Sun in Orange color, Earth in Blue color and Moon in white color. 2mm and 3mm metal rod is used as an axle. Support is required…
PiBerry v1.7-2.0: The Portable Cyber Handheld for Cybersecurity & Makers 🚀 Take your hacking and tech exploration to the next level with the PiBerry v1.x, a compact, open-source cyber handheld device. Built around the Raspberry Pi Zero…
PiBerry 10.0: The Ultimate Raspberry Pi Innovation Kit! 🚀 Unleash your creativity with the PiBerry 10.0, our most advanced cyber innovation kit yet! Now featuring a USB keyboard for enhanced flexibility, along with mounting options for…
Like the LP2 and LP3, the LP4 has a sturdy handle on the laser head for transportation and handheld engraving. However, due to its weight and the loosely attached magnetic protective cone, it doesn't stand on the cone without the electric…
A stand for up to four handheld scanner or two-way radio devices with a belt clip, based on my other model for one device. No supports required, I printed with PLA+, 15% infil. There is a single device version here , and a three device…
IUD Placement model consist of two parts, body is 3D printed and transparent cover cut from 2mm acrylic sheet or another transparent plastics. Manufacturing instructions: Material: PLA 3D Printer: FDM 3D printer, average print time 1,5…
UPDATE: 1.51 -reduced amount wifi card sticks out (11/25/24) UPDATE: 1.5 Has been released! -The case has been reduced in size and enforced in key areas. -Added external screen controls. -New power button, still goes missing but it's new!…
I broke the lever on my PT-Touch EDGE Model PT-E300 portable label printer. I wasn't sure if I could design a part that would be strong enough to work. Well the part works really well, I printed it in Polymaker PolyMax™ PLA a tough PLA…
About Over the course of the last several months, I've been adding to my handheld collection, and needed a simple but universal way to nicely display them. This is what prompted me to make my own set of these! I have attempted to make it…
GPS Garmin mount. This is a robust design that uses two wood/metal screws in the center to hold the mount. I have printed this at 15% infill and it is very strong. I have included the .stl file for changes if you like. Happy Printing!
I added some more vent holes as I am going to use a 7880 card and will need as much cooling as i can get!
I needed to use swiffer cleaning pads on a gym rubber mat, and the commercially available solution does not hold the wipes firmly enough. So I created this. You will destroy the wipe before it becomes unmoored. It is designed to be used…
This is a simple holder I threw together in TinkerCAD for a handheld fan from HEMA. I needed a way to mount it to my IKEA SKÅDIS board and nothing I could find would really work for this little fan. I used a M2 screw because I don't have…
Zweiteiliger Ständer für Barcode Scanner. Man benötigt noch einen M6 Gewindeeinsatz zum Einschmelzen und eine M6 x 20 Senkkopfschraube mit Inbus um das Oberteil zu montieren. Gedruckt mit PLA 15% Infill und 4 Perimeter. ……………………. Two-part…
This is a framework based handheld gaming computer, a bit like a steam deck. But unlike a steam deck the framework handled is upgradable. Need more storage? Drop a larger M.2 SSD into the M.2 slot on the motherboard. Need more…
Dreiteiliger Ständer für Barcode Scanner. Zum Unterschied von meinem geschraubten zweiteiligen Modell ist dieses dreiteilig und wird zusammengesteckt und mit Klebstoff gesichert. Gedruckt mit PLA 15% Infill und 2 Perimeter. ……………………………..…
I designed this stand for the jisulife life7 fan, it allows the fan to be used at more angles for example when sitting at a desk. Also ideal for storage as it takes up less horizontal space. Print without supports at 0.2mm. Printed in…
Oxlam handheld vacuum adapter allows for attachment of smaller tools. I can now use the inflation tools to vacuum fuzzy bits out of my sewing machine.
I created this to hold my switch, steam deck, Odin2, and other handheld devices on my behind couch shelf. It holds either 5 or 7 devices up to 1.6" thick, and fits on a shelf or desk at least 11 ¾" deep for the 7 device file and 5.9" for…
this is a simple art that demonstrates the power and precison that is 3d printing
We have many, many more attachments that fit generic 1.25 inch round vacuum wands/hoses than we do the Bissell Pet Hair Eraser so my roommate requested an adapter similar to what's available for Dyson handhelds that would allow us to use…
This is the files to make a DIY Cold Laser Therapy device. I had an ankle injury and wanted to see if using Low Level Light Therapy would help. I didnt like that devices were in the 200$ range. I was able to create this with simple laser…
Created for my DS, 3DS, PSP, and retro emulator handhelds which are all ~20-22mm thick (not including buttons). Holds 7
Update - based on feedback, V2 now has rounder edges and a slightly more secure latch for pocketing. I needed a screen protector for my Powkiddy V10 so I could toss it in my bag and bring it with me without worrying about it. This one is…
A remix of Universal Handheld Console Stand by Daniel Bajo Collados.
This is a handy little box to store spare collets in. 2 compartments, one for 1/4" collets, and one for 3/8" collets. I designed this as I recently lost 4 spare collets. Given how small they are, they're easily lost, but with this box I'm…
This is the DIY MiSTer Handheld - a handheld retro gaming console that I made, based on the popular MiSTer FPGA platform. I've released this design as open source, and am making the 3D files available here. The additional files and build…
This may be a little niche, as this is an old tool, but ii thought i would share it anyway, the mount holds one hand drill with a diameter around 35mm, and has spots for up to 8 drills / diamond engraving bits
Wanted a quick and easy way to store and get to my handhelds. Will work for Ikea Kallax with the glass shelves installed (https://www.ikea.com/au/en/p/kallax-glass-shelf-70377382/).
This is a handheld stand for a shelf or desk. Allows for storage of 5 devices upright and need to be adjusted to be able to charged from underneath the handheld but cut down on the needed filament. The 5 device stand can be printed on the…
Handheld Vaccuum Nozzles & Holder (no supports) EASY TO PRINT Picture printed with PETG & A1
Replacement collection chamber for this PATO Cordless Handheld Vacuum. It fell off the desk and one of the detent clips snapped off. Modelled this as a replacement. The main chamber is one piece and printed with supports. May be able to…
FoodSaver V1100 Cordless Handheld Food Vacuum Sealer - Cup
A simple vacuum holder, mounted with 5mm dry wall screws with conical head. Printed in PLA, but PETG or ABS would work fine as well. The gcode file includes an infill modifier for the mount part.
This writing utensil container does not, as is generally the case, simply stand on the bottom of a desk top ... this container is held by a hand. The container is inclined forward and appears to offer its "services" to its user. It is…
Case with 10mm magnets for the R36s retro console.
A simple yet elegant wall mount for the Miele turbo vacuum hose. Printeded with black PLA on a MK4 with 50% infill and 0.2 layer height. I printed it standing upright and I activated supports on the bed only.
This was made for holding a hand held mic that is 35mm circumference this go into a pop filter that comes with amazon mic kit and then you slide the filter part of it in to a couch seat gap.
A fun handheld nerf crossbow. Requires an elastic band. Can be printed entirely in one go on an A1 Mini. The Puller part sometimes needs to be run up and down the crossbow a few times to ensure it releases nicely.
The dual prong and trident handheld display stands were inspired by a model posted by Snoopy31195 . They are designed to print quick while being esthetically pleasing and keeping filament usage to a minimum while maintaining stability. I…
This is the “Powder Mag” My first attempt at a fast, consistent, and precise powder dropper for reloading. Has been working well with ball and extruded powders, I have not tried flake powders. With the few powders I have tested, it has an…
This creation allows you to use the original tripod as a handle with an option to mount your smartphone (using the additional ¼ thread on the scanner). Features: minimal additional gear in your case usage of existing mounting point on…
Information: I actually designed this stand because I needed something for my handheld PC, but I realised it was actually useful for most devices. After printing it, I realised that this would actually be useful for a lot of people. This…
I needed a longer tool for my small vacuum to reach into the corners of my 3D Printer :) I used a customizer on Thingiverse to create this. The exact vacuum can be found on Amazon by searching "KMM Handheld Car Vacuum Cleaner, 9000Pa…
make a holder for my new Shark® WANDVAC™ Cord-Free Handheld Vacuum to go under the shelf
Handheld Wifi Yagi Antenna Enclosure and Grip Mount is a clamshell design enclosure for current available yagi antenna. It provides a comfortable grip for handheld field use for direction finding using a portable spectrum analyzer (TinySA…
This is a case for the Chaos NAND handheld synthesizer from Synthrotek. https://www.synthrotek.com/products/lo-fi-synthesizer-circuits/4093-chaos-nand-handheld/ You will need to split the lid from the bottom with your slicer, I couldn't…
Yeah, you could buy one… but why not print it? This spinner is my new desktop fidgeting toy, it spins so well! The secret…? 6mm airsoft bb's. (ok, ok, I know it's technically cheating but they work so good! Let's just call it a Hybrid) I…
I made this for my DC-44; it slides on the end of the slender attachment. Will likely fit other models but it's worth printing a small section first to test the fit. Good for tight spots! Print instructions Category: Household Print…
Introducing GRIZZLY! I designed this handheld game console to look the way I wish consoles did. I also wrote a step-by-step guide to make it straightforward for anyone to build. This project is completely free to build under the Creative…
