Handheld Tension Sander
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sander that effortlessly leaves super smooth and rounded edges. Designed for lasercut parts, primarily for medium holes.
- Rating
- 4.517 / 5
- Likes
- 2,848
- Downloads
- 4,178
- Makes
- 32
- Views
- 52,519
- Reviews
- 29
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The belt is flexible and small to fit into medium to large holes. Also conforms well to both external and internal fillets
I suggest using 200-600 grit, and printing with PETG.
Model is slicer scalable, although provided scale gives the best results. Scaling will impact fillets which may not look as good.
WARNING:
Make sure your sandpaper is strong and does not rip with a reasonable amount of tension. Folding the paper over itself helps a lot with strength, although cut-up belt sander belts work best. 10mm*150-180mm.
If your belt ends up being top thick, scale down the front and back holder pieces in the slicer. Turn off uniform scale. Scale down by an extra 0.1mm-0.2mm in X and Y but not Z (vertical axis).