Counting matching models…
Printing parameters: Resolution: 0.2 mm Perimeters: 4 Infill: 15% Supports: no Brim: recommended Assembly: Add some corc, rubber or foam at the bottom of the block. When you clamp in sand paper, the blocks will be fixed. Review: Related…
Print approx. €5.82–€7.11 excl. taxPreliminary estimate for one variant
Sanding block with simple construction. Made to work with a 38mm x 230mm - 240mm sandpaper stripe. After trying out a few sanding blocks, not finding anything fitting my needs. Either they were over-complicated, screws were fiddly, the…
Print approx. €3.58–€4.38 excl. taxPreliminary estimate for PETGSource material: PET
Other parts: M3x20 bolt (2x) or you can change parameters M3n nut (4x) or you can change parameters Parameters: width lengthUp lengthDown height boltD boltHead boltHeadD nutHeight nutWidth
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
Required a quick and easy tool to assist with sanding some of my cosplay props. Designed this in Fusion 360, and takes roughly 3 hours to print. Print instructions Print at 0.2mm with at least 20% infill. PLA works fine.
Print approx. €3.13–€3.82 excl. taxPreliminary estimate for one variant
Let your kids explore the world of construction with this fun and realistic Sand Mason Toy Set ! This 3-piece set is perfect for building detailed sand structures at the beach or in the sandbox. It includes: 🧱 Brick Mold – a block-shaped…
Print approx. €2.05–€2.51 excl. taxPreliminary estimate for one variant
I have a lot of 1" thick sandpaper strips for the Rockler Bow Sander. The problem is that the tension adjustment is not well thought out - it's very difficult to get good tension. I've fixed that with this design. I've attached the Fusion…
Print approx. €23.92–€29.24 excl. taxPreliminary estimate for PETGSource material: PET
Design Starting from the two following models: https://www.printables.com/model/122734-systainer-150mm-sander-holder https://www.printables.com/model/135647-mirka-deros-wallmount-double I designed in Fusion 360 a new handler compatible…
Print approx. €3.76–€4.60 excl. taxPreliminary estimate for one variant
It is designed to be modular to provide flexible use. The demi-spheres provides guides for easy gluing and you can print the grit number in 20 pt on a 3/8 ''(9mm) labels with any Dymo Label maker.
Print approx. €2.83–€3.46 excl. taxPreliminary estimate for one variant
My second attempt at this model, based on input from other hobbyists. The added protractor is by Joaelso. https://www.printables.com/model/171880-winkelmesser-protractor The M4 knob is by StriK3FoRC3 from…
Print approx. €8.92–€10.90 excl. taxPreliminary estimate for one variant
I did not see any models that would attach my Rotex 150 to a Sys3 Systainer so I modeled this one. This prints in 2 separate pieces with no supports. It slots right into the front of the systainer on either side. Hardware needed is 3x 6mm…
Print approx. €0.52–€0.64 excl. taxPreliminary estimate for one variant
Sometimes I need to sand or polish a small area. I don't like to prepare then my belt or vibration sanders. That is why I designed this very simple flexible disk to be used by a handheld battery drill or screwdriver. It will accept…
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for one variant
This is an adapter for to connect a vacuum cleaner to an Einhell TC-RS 38 E disk-type sander. Print Settings Rafts: No Supports: No Resolution: 0.2mm Infill: 20% or more Filament: PLA or PETG Notes: Print with 0.4 nozzle and 0.45mm line…
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for one variant
A sand mold inspired by the question blocks from Mario games!
Print approx. €4.24–€5.18 excl. taxPreliminary estimate for one variant
boite a sandwich en deux partie
Print approx. €3.24–€3.96 excl. taxPreliminary estimate for PETGSource material: PET
These are display models of Musellifer profundus Vivier 1974, a deep-sea gastrotrich. This worm is frequently encountered in the vast plains of the ocean bottom, from shallow coastal waters to the deepest depths. Members of this species…
Print approx. €2.02–€2.46 excl. taxPreliminary estimate for one variant
Store 1” wide by 18” long sanding-belts for your Work Sharp knife sharpener to prevent damage to your expensive belts. Print multiple boxes in different colors to protect all your belts.
Print approx. €1.56–€1.90 excl. taxPreliminary estimate for one variant
Store ¾” wide by 12” long sanding-belts for your Work Sharp knife sharpener to prevent damage to your expensive belts. Print multiple boxes in different colors to protect all your belts.
Print approx. €1.06–€1.29 excl. taxPreliminary estimate for one variant
A bunch of small sanding block tools of various profiles intended for getting into tricky spots in small-scale sanding and polishing work. The tools are 20mm wide and feature a bolt on each side for tensioning and retaining a sandpaper…
This is a three part sanding block, made to be very easy to put together. Scale as you like, but be wary when scaling down, the bolt may need more clearance. At 100% scale needs about 19cm of sandpaper. Recommended settings (best to use…
To assemble, you will need an M6 screw at least 25mm long with a hexagonal head and an M6 nut. It is also possible to attach a thin strip of foam to the sanding blocks, but it is not necessary. See also: 18mm Utility Knife…
Deutsch: Das ist ein Schleifpapier-Block passend zu den Schleifpapier-Rollen mit einer Breite 25 mm (1 Zoll) oder auch zum selber zuschneiden dafür etwas breiter in 300 x 40 mm. Für den leichten Zusammenbau benötigt man nur noch eine…
This is a storage solution for sanding discs in 125 or 150 mm diameter. They can be stacked with an integrated connection system and they keep together also without screwing them to a wall or wood. Anyhow for more than 5 pieces it's…
Toilet sand clock timer This is my custom version of sand clock from https://katamco.com Carpe diem is a Latin aphorism, usually translated as " pluck the day " or " spend your day trully " Assembling Cover the empty holes with a…
This model gets a few downloads, I would love to see your end product, please post it as a make, it may motivate me to make upgrades or mods. Thanks! Overview The idea behind this case is to be simple to print in terms of setup, required…
All of us have at least once seen our towel flying because of the wind, well with these clips the beach towel will remain where you left it, I hope you like the idea and the design inspired by waypoints, the design is designed to be as…
Having trouble finding a sanding block that can do multiple jobs , one that can grip the paper properly, with great tension ? This one does it all, while being optimized for printing and assembly ! 🤩 Do you like the design? You can help…
Dremel Disc Sander This is a disc sander table, which is driven by a Dremel 395 or similar. I use a rubber mount to hold the sanding disk, which came with a Dremel grinder kit, but there are universal kits on Amazon. You can stick Velcro…
Break-action sanding block Open. Load sandpaper. Close. SAND IT! Your sanding block experience has never been easier. USE: Before first use, to open the hinge: Hold the sandpaper half by both sides in the middle Holding this half in the…
This simple box allows tidy storage and prevents curling of sanding disks. The slot in the front allows easy selection and removal of the required grit, and dividers are marked with common grits. This box is designed for 125mm (5") disks,…
a simple stone arch 20k modell for diorama terrain USA Utha monumnt valey replicatet supportfree Have Fun
I printed with 40% infill ABS for better structural rigidity and heat resistance.
Sandworm based on Dune 2021. Roughly the same size as the first player marker in the board game Dune Imperium. ~43mm in diameter. Designed to fit into my Dune Imperium insert https://www.printables.com/model/272184-dune-imperium-insert
3D-Printed Micro Sanding Blocks – Precision in the Smallest Details When it comes to fine detail work, every millimeter matters. Tiny edges, intricate curves, or delicate engravings can be difficult to refine with traditional tools.…
UPDATE! the design of version 1 was a bit too brutal, also the air vent bracket clip was not very stable in case of a sudden turn… the new V2 solves both issues. After several iterations I now added a version 2 which looks much better,…
A selection of files to make a 3 way desktop box for the Make Noise Strega. You will need a piece of M8 (8mm) threaded bar to join the sections together and some 3mm bolts to hold the front plates on. To attach the handle I suggest using…
Purpose: This is a sanding tool for the drill with a hexagonal connection for a better torque transmission. I know, there are some similar tools already available, but I couldn't find one which fits to the thickness of my sandpaper. For…
I designed this wall hanger to fit my Bosch 6'' random orbital sander Bosch GET75-6N. It is printed in two pieces to allow it to be easily printed on most 3d printers. With the screw holes being inline with each other this can be screwed…
You get those sanding disks in a savings pack, only for them to get dog eared or lost before you use them. The packs usually come in six grit sizes (40, 60, 80, 120, 180 and 240). So have created holders so you can keep the disks in…
These applicators help you quickly align sanding disks perfectly with the holes in the base of the sander. These are designed for the Festool ETS-150 and both the delta and the disk pad for the Rotex 90. See the video here
3-drawer storage unit to hold 5" (125mm) sanding disks. The drawers are removeable so you can take them to where you need them (the optional retention springs add tension and a soft stopping point when you pull the drawer nearly all the…
Two M3 x 25 screws and nuts for the hinge. Four 5mm x 3mm magnets glued in place to keep it closed. It should print well without supports. I have added the Fusion 360 file for those that may want to tinker with the design. I'm not much of…
The other parts of the original DisKeeper can be stacked on top of this one: 125mm Cover, 125mm Spacer or 125mm bins.
Hi I am Engitect, passionated 3d Designers for practical stuff. I hope you will enjoy this simpl design of a stackable sand disk organizer for 125 and 150∅ orbital sander. This design is stackable, print as much as you want. You will find…
The UV Sweeper is Patent Pending and will be sold directly only through www.3DReefing.com Organisms like sand dwelling dinoflagellate's have plagued the aquarium hobby for decades. With the UV Sweeper you will be able to target eliminate…
Designed by DSK001, this fun little simulation lets you have digital “sand”. Tip the cube and watch the sand fall. “cube base” is an optional base that uses a standard TT motor to constantly rotate the block on your desk.
EDIT 12FEB24: I am not sure when it happened, but all except 4 of the models were corrupted / deleted. I just re-uploaded them all today, so hopefully that won't happen again. – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –…
Create perfect sand castles with this kit for kids. There is 9 vent hole in the castle mold to help the unmold the sand castle. The shovel is reinforced and has internal angle to be able to print without supports. Print settings: Nozzle…
as always, some measures in the pics so you can check if your tool fits if its from another brand.
Sanding Block for paper with 94 mm with (standard roll with sold by local shops in germany). I mark this as a remix even if I had no particular model in mind while making this. But I sure took some inspiration from oter modells. Fits 4…
A Carlinkit mount for the original phone holder of the Dacia Sandero Stepway. Plug and play. Print it in asa/abs/petg
When I was filing off the remaining brims on a 3d-printed object with sand papers, I wanted a handy flat sanding block that is useful both in my hand or on top of my workbench. This Handy Flat Sanding Block is for such demands, sanding…
As a woodworker, I needed needed a way to store my sanding disks. More improvements are comming … A way to interlock the holders and to hang on a wall if you choose. and yes, the photo shows a 5 inch 320 grit disk in a 220 holder :)
je to pro spustu nastavcu a dalšího vybavení pro multifunkční ruční brusku
Welcome to my collection of Sanding Blocks! Use these custom sanding blocks to get in hard-to-reach places, or just as a tool to make sandpaper easier to use. The handled sanding block is meant to be more ergonomic, however it will…
I could not find a 3D model of Botticellis Mappa dell´ Inferno or Map to Hell on any platform so I created my own in Tinkercad. I really hope you like this design as much as I do. Sandro Botticelli, was born March 1, 1445 in Florence and…
Originally published here: 67P/Churyumov-Gerasimenko scaled one in eighty thousand by tato_713 - Thingiverse These models were rendered using MATLAB R2016a the model of the Rosetta spacecraft from the PDS site. This comet is too complex…
I worked up a set of Objective Markers for the terrain I've been building in an Egyptian theme. You can find other models in my Ancient Sandtone line here as well. Each one is unique and comes numbered with small hash marks on one of the…
small, handy bow sander You need: - the 3d printed parts from the file - hexagonal M4*20mm screw - 2x hexagonal M4x15mm screw - 2x wing nut M4 - Sandpaper with 265x10mm The sandpaper can be slightly tightened or loosened using the screw…
Inspired by the soft, flowing shapes of wind-sculpted sand dunes, this catchall tray transforms a simple everyday object into a miniature desert landscape. The interior features a layered, wave-like surface that mimics the natural…
an attachment to your standard drill that allows for a sanding disk
This is a set of holders for 3" / 75mm Velcro backed sanding pads. I have previously made a set of holders for 5" disks here and from requests, made them for a bunch of grits. I used that info to make these with all of the requested grits…
Printed in PETG but PLA is fine also I assume.
blok szlifierski używany do szlifowania modelowania i takich tam polecam :)
Improve your orbital sander's dust extraction by precisely aligning holes in sandpaper sheets. Helps stack discs in a very neat and organized way. Printing Rigid filament, 10%+ infill. Layer height doesn't matter. No supports needed, but…
This is my first model. It a sandpaper roll dispenser with a magnetic lid and should be compatible with gridfinity. it designed to fit 100mm width sandpaper roll with a max diameter of 65mm. It has a serrated blade that is attached with…
This is a osVAC M32 adapter for the Einhell TE-OS 18/1 oscillating sander. It is secured with 3 screws. The inner diameter is 28.8 mm, maybe it fits on similar tools. You'll also need: 3* 3x10 wood/universal screws (optional) o ring R21 I…
I know there are already a number of sanding blocks here, but this one is relatively small (105 x 56mm). The sandpaper sheet that I know of measures 28 x 23 cm. I designed the sanding block so that 5.6 cm wide strips are used, so you get…
The weight for 100% density ABS is ~47 grams.
I made this large sanding drums for Dremel, to myself, kinda in the rush. The label is crushed by the washer, but still readable. The flat bottom part was printed in PLA without support, but survived. I modeled this for my personal use,…
This is a handle for the common 3"/75mm sanding disk. Print it in different colors to distinguish the different grinding grits. There is a 0.2 layer inside the handle, so no supports are necessary. Just use a drill to remove it after…
“Sand Garden Bowl Combined” can replace the entire bowl, or the split design can be used to have more manageable print times and is designed to sandwich the silicone mat between the two pieces to maintain a good seal and a white grippy…
This is an ergonomic tool, that you can use with any strip of sandpaper you prefer. I printed it from PETG , but you can use any type of filament. You need: 1x M6x20 screw 1x M6 nut -for the “base” (You can set autostop in the slicer, and…
I made this trowel for building sandcastles on the beach. The STL is for my hand size, reduce the scale for children or people with smaller hands. I printed 75% scale for my 7 year old son. I paused the print and changed filaments to get…
I've had a random orbital sander pretty much since they existed and have never found the need to precisely centre them on the exhaust holes, although it's a cause for minor celebration when I do. Now I can celebrate every time! This…
Embodying the graceful curves of desert dunes, the Sand Dune vase is a tribute to the serene beauty of nature's landscapes. It mimics the soft ripples of wind-swept dunes, while its sculptural form adds a modern, artistic touch. The…
Experience the divine serenity of ancient Buddhist art with this breathtaking 3D printable statue that transforms any space into a sacred sanctuary. This meticulously detailed STL model captures the iconic multi-armed deity seated in…
Modular drill attachment that uses replaceable strips of sand paper. Parametric, open-source, free. Made in ShapeScript . Parts: Bolt Washer Nut Sandpaper Printing Filament: Anything rigid Infill: 15%+ Walls: 3+ Seam: Random position…
Made to fit pegboard with 12mm between the holes like for example Biltema. If you add the backpanel it works freestanding. Just screw together with a couple of M3 screws. The pegs fit in the holes of the pads and are chamfered for an easy…
Sanding Disc Holder added on the HWS Snap in hexs
This is a flattener designed for the Hack Pack Box #4: Sand Garden. It is a circular container filled with sand, with a magnetic ball moving around to make patterns. One of the problems is that it is really hard to get all the sand evenly…
This is a sand filter for a pool, is printed in petg Filtro de arena para alberca, esta impreso en petg
This is a very versatile OpenSCAD app that will let you create a wide variety of tools with different profiles and uses: spatulas, moulding tools, sanding blocks and paint stirrers (and what you can imagine). Some STLs are included as…
3D print this Sheath, and with the help of a lock, you can prevent people from using/reading the data inside your Sandisk external SSD. I wouldnt actually recomend this for real security, it was made as a joke, so that you can give to the…
System for storing 150mm sandpaper disc's in a SYS3 237. The bottom is the bott/tanos/sys3 org bottom. Printed in 4 parts with connectors. The boxes are 2x7, 3x7, 4x7 and 5x7 in size. The bottom grid needs support under the cross in the…
The Galactic Digger Set is a sci-fi rake and shovel toy for kids, perfect for cosmic adventures in the sand! Let your young explorers carve alien landscapes, dig Martian bases, and uncover space treasures! Printing For the Rake and Shovel…
Create interactive simulated grains of sand! In this project we’ll show you how to build an LED physics toy. These LEDs interact with motion and looks like they’re affect by gravity. Full Tutorial:…
I did it for my Bosch Oscillating Multitool sanding pads, and also for the size sandpaper from Parkside.
File contains two parts, the base and a cover. The cover allows you to place plastic wrap over the pit to help keep the sand from falling out. To connect, simply use the 6 bolts that were keeping the previous sand pit to the base. Put…
These are grouped in sets of three. Two of them will hold all the common sanding grits, 80 through 600.
Conical Compression Clasp for sandals or shoes with elastic to make them tighter
Mold for sand and shallow water. I added an edge to make it easier to grip the mold with a wet hand. Create beautiful ornaments from sand, snow, ice, and even earth and dried clay. You won't build much out of mud, but try at your own…
I have tried modeling a field/sand/drag harrow for towing behind my Traxxas Trx4 Defender, just for playing around on the local lake beach while my son plays with his rc boat. It turns out quit fun but could be improve upon. First, it…
This clever device will help align the holes on a sandpaper to a sander. Once the holes are better aligned you will get better performance from your dust collecting system. Less dust in the air means less dust to breathe. There are two…
/////////////////////////////////////// ENGLISH /////////////////////////////////////// Standard cursor from Windows 98. It consists of two parts. I print both parts upside down to get a nice surface thanks to the textured build plate,…
This is a snug-fit vacuum adapter that connects a 35 mm Kärcher hose (tested with Kärcher KWD2) to the Bosch UniversalSander 18V-10. It is a remix of the Dyson DC19 adapter by lord_henry , adapted to fit 35 mm Kärcher hoses. The original…
A bit which turns your drill into an small sander. Just cut a piece of sanding-paper into a 40x63mm rectangle and glue it around the attachment.
Very simplistic parametric sanding block for outside radii. Useful for sanding dowels, outside curves, etc. I use it for sanding miniature bases. FreeCad model included. If you customize the model make sure you account for the thickness…
