1 / 4
Simple Sanding Block / Sanding Tool
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A very simple but rugged tool for sanding. PETG recommended, scale as you like.
- Rating
- 4.931 / 5
- Likes
- 1,999
- Downloads
- 9,528
- Makes
- 147
- Views
- 27,066
- Reviews
- 131
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This is a three part sanding block, made to be very easy to put together.
Scale as you like, but be wary when scaling down, the bolt may need more clearance.
At 100% scale needs about 19cm of sandpaper.
Recommended settings (best to use PLA+ or PETG)
Main block: 20% infill or more, 0.2mm layer, no supports needed
Bolt: use 40% infill, ideally PETG, 4 wall lines, 0.1mm layer.
Wedge: Use whatever settings
None of the parts require supports.
The clearance test is used to figure out if there's enough clearance without wasting material.