Handheld Tension Sander
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sander that effortlessly leaves super smooth and rounded edges. Designed for lasercut parts, primarily for medium holes.
- Ocena
- 4,517 / 5
- Polubienia
- 2848
- Pobrania
- 4178
- Wydruki
- 32
- Wyświetlenia
- 52 519
- Oceny
- 29
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The belt is flexible and small to fit into medium to large holes. Also conforms well to both external and internal fillets
I suggest using 200-600 grit, and printing with PETG.
Model is slicer scalable, although provided scale gives the best results. Scaling will impact fillets which may not look as good.
WARNING:
Make sure your sandpaper is strong and does not rip with a reasonable amount of tension. Folding the paper over itself helps a lot with strength, although cut-up belt sander belts work best. 10mm*150-180mm.
If your belt ends up being top thick, scale down the front and back holder pieces in the slicer. Turn off uniform scale. Scale down by an extra 0.1mm-0.2mm in X and Y but not Z (vertical axis).