286 modeli
Here is my take on the tensegrity table, a print in place version ! To tension the mechanism, turn the little nobs in the center using pliers I recommend printing the file with built-in support, they are very easy to remove Printed fine…
A structure that uses opposing tensioned strings to remain stable. A neat toy/display stand/demonstration piece/conversation starter that is a kind of optical illusion. UPDATE: I have changed the model's version to 2.0. I made some simple…
These two connected tensegrity structures pull on each other. You can give them different hights and angles. Start with the tension of the two lateral threads (1 and 2), then the central thread (3) and finish with the external (4). Longer…
Tensegrity Hexagons. Tensegrity is a structural principle where elements under compression do not touch each other. They're are only connected and hold in place by tensioned members (usually cables). The term "tensegrity" is short for…
When you wash your car with a bucket of soapy water, the dirt that comes off the car ends up in that bucket. This grit guard captures that dirt and keeps it from getting back on your sponge and scratching the paint. It was inspired by the…
This is a print in place tensegrity structure that is held in place by 4 strands of printed filament. When printing use the 0.3mm layer height, make sure ‘detect thin walls’ is checked and put your seams at the rear. When sliced you…
I printed rcmz's print-in-place (PIP) Tensegrity. Thanks rcmz for sharing this fantastic model! My PIP outcome was pretty humble due to shitty filament, maybe also due to sub-optimized parameters. But throwing 400grams of material with…
A tensegrity print-in-place table that prints without supports. When printing use the 0.3mm layer height, make sure ‘detect thin walls’ is checked and put your seams at the rear. When sliced you should be able to see the single strands of…
✨ Tensegrity Structure Model – Ready for 3D Printing ✨ This model is based on the principle of Tensegrity (Tensional Integrity), which uses forces of compression and tension to create a striking visual illusion of levitation. The rigid,…
A Giant Spider Tensegrity Ornament When printing use the 0.3mm layer height and make sure ‘detect thin walls’ is checked. When sliced you should be able to see the single strands of filament and there should be no empty layers. Any…
A grit guard sits in the bottom of your wash bucket in your wash solution. It allows the dirt and debris that gets stuck to your wash sponge/mitt/towel to fall through the grate and rest in the bottom of your bucket preventing…
It holds grit for your chickens and mounts with zip ties. Prints with no support. Chicken approved. V2 grit feeder is shorter and broader with a larger opening to perhaps accommodate oyster shells or larger grit. I haven't tested oyster…
Tensegrity arc. Tensegrity is a structural principle where elements under compression do not touch each other. They're are only connected and hold in place by tensioned members (usually cables). The term "tensegrity" is short for…
"Ebony and Ivory" … live together in perfect harmony! This is already my fifth contribution to the topic "Tensegrity" here on PP. I like this one best! This object is not about a function that is to be fulfilled (carrying a table top or…
I thought a longer model would be easier to fit a bigger plant, so that's what I made (it also looks cooler). Now I don't know how watertight the little planter cup is supposed to be, so I printed it in resin. Unsure what FDM material…
Hope you enjoy! Will be building myself soon!
These are the cables that I use: https://www.amazon.de/gp/product/B0778FV6K4/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&th=1 Added a minimum amount of support material in the GCODE files. Printed fine like this and it just snaps together,…
Was going for a more striking yet stylish model to show off what can be done with a 3d printer. Designed for 0.3mm layer height, as the strings are 0.4mmx0.3mm. Probably won't scale well, but might be possible. Just need to watch the…
A small tensegrity (Tension-Integrity) study. I redid the CAD files from scratch to make it more stable and printable. Print instructions Print once or twice, scale to fit. If printed twice, the same sized parts can be put together.…
This is a remix of the Low Poly Tensegrity Dragon by Mochi115 . I liked the concept of the tensegrity dragon with one tension and two support elements. I made the following changes Modified dragon model Eliminate need for supports Add…
Fully printable tensegrity, no strings needed. It hasn't been designed to support any weight, however it is OK to put some grams on top(see image). If you are interested in adding some weight, message me. I may be able to improve the…
This is the third part from my deep dive into tensegrity models. I still have a few more coming. Learned a lot, all in all I've created 5 models. I'll post them all here when I can. I find things like this fascinating. At first glance it…
Chicken grit feeder with quick release mounting for easy refilling and cleaning and lid for water and dust protection. Might also be used for other feed. I recommend printing the feeder with supports.
This is an SVG vector file for laser cutters to assemble a tensegrity table, aka an impossible table. Use nylon fishing line or any other strong thin thread to assemble.
Tensegrity structure. https://youtu.be/Lo\_Qxrsz824 Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Resolution: 0.4x0.2mm Filament: Prusa PETG Galaxy Black Category: Physics & Astronomy
This grit guard is designed for placement at the bottom of a standard big box store 5 gallon bucket to capture dirt and prevent scratching while washing your car. This design is a remix of @CherryPickerSocerer's grit guard, which was…
Slots for the strings make this super easy to put together. It will sit flat because knots fit inside the parts. You can print both parts together at the same time. Support material is not needed. You can use a variety of string lengths.…
A Star Wars Tie Fighter inspired tensegrity print-in-place table that prints without supports. When printing use the 0.3mm layer height, make sure ‘detect thin walls’ is checked and put your seams at the rear. When sliced you should be…
I loved the original print in place. Try it. But this one is fun also. If printed at the supplied size, use layer thickness of 0.2 mm, especially for the chains. You will need 4 of the long chains. One short chain. Print the platform and…
Hello Everyone, This is the second part from my deep dive into tensegrity models. I still have a few more coming. Learned a lot, all in all I've created 5 models. I'll post them all here when I can. I find things like this fascinating. At…
This is a ‘grit guard’ that will stop your car wash sponge picking up grit from the bottom of your bucket. It uses a hexagonal mesh because Hexagons are the Bestagons! Two STLs are included (flat mesh and deep mesh) but you can use the…
So... a legitimate grit guard will likely run you less money than the cost of the filament to print this one and with Amazon Prime you'll likely receive it before this print would complete. However I'm sure someone will find themselves in…
Introduction I've always been fascinated by tensegrity structures and when a magnet design flash contest was announced I thought it was a good opportunity to explore this fascinating concept further. The model I came up with is a simple…
I did this remix to avoid the use of screws and nuts, except for the tension M3 screws. Small adjustments here and there: various rounding, sacrificial bridges on the top table, modified thread paths to facilitate tensioning. The shuttles…
Print at approx. 0.3mm layer height with detect thin walls checked
A tensegrity model that can be printed without supports. I included the source files if you would like to edit it. Assemble using fishing line. I recommend the two half hitches as a knot as it can be tightened after tying. Remember to…
"Hot End" is the name given to the nozzle on the 3D printer because it can get up to 260° hot during the printing process, depending on the type of filament. These nozzles have different outlet diameters and should be replaced from time…
Gritty Kylo Ren Helmet not hollow.
Print with Support everywhere 0.4 Nozzle 0.15 mm Layer Height PLA or PETG When the holes are not not visible you can just scale it up a bit.
Assembly instructions: https://eiffeltower.nenoff.com/ Stability test video: https://www.youtube.com/watch?v=wlf7PaVMOOA Please share your build! I am fascinated by the tensegrity (tension & integrity) buildings and structures. They look…
The simple chicken grit feeder, if you have chickens you should be giving them grit. This makes it easy as you can screw it to a post/wall and keep it off the ground a bit so it hopefully stays clean. I printed it without supports on an…
Mobicool FR40 grit. Total dimensions 437mm*237mm*6mm. I printed it in 2.5mm layer height and it took around 6 hours for each part. Make your own grit: Also added the Fusion360 file to let you create your own sized grit. Just change the…
This is the fourth part from my deep dive into tensegrity models. I still have one more coming. Learned a lot, all in all I've created 5 models. I'll post the last one here when I can. I find things like this fascinating. At first glance…
This 3x1x2 Gridfinity-compatible box is designed to hold up to four JBC C245 or six JBC C210 soldering tips. Each tip rests in a slot with a bit of lengthwise wiggle room—enough to allow for easy insertion and removal without forcing a…
Bolt and nut - held by wrenches - connected by a thin thread, keep a fixed distance to each other and although not screwed, still give the whole object a stable structure. It is a fascinating experience when, after the 3D printing and the…
This is a model of a low poly dragon flying over a cliff. It uses tensegrity to balance itself in a position so that it looks like it is flying. You will have to add notches to some parts in order to place the strings in place. I found…
The speed will depend on the machine and the type of PLA you are using. I always recommend that the first layers be printed at a speed between 10% and 20% (although if you are confident and know that the bed is perfectly leveled, you can…
Modellbahn Spur N – Streu- / Splittkisten Zubehör für die Modellbahn. Ich habe Streu- / Splittkisten für die Modellbahn Größe N entworfen, die Kisten sind mit FreeCAD entworfen worden. Damit noch mehr Abwechslung auf die Modellanlage…
Tensegrity Table printable without Supports. Print with PLA, Layerheight 0,2 or 0,28 is also fine. Infill 5-15% Place two models on printplate, bottom and top are the same.
Here are some further mods on the Low Poly Tensegrity Dragon… In this edition I have altered the base to add in three adjustable tensioners to make balancing really easy. Just feed the line throught the model (the holes through the wings…
Inspired by what fellow V1E maker @PeterH already did for round sanding disks (which I printed and it's great). 😊 I'd class this as a remix except that every single polygon and face was done from scratch. Nevertheless, a lot of credit to…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I could not fit the original thing on my build plate (it's 200x200) so i decided to cut it to a quarted size and print 4 pieces :). It worked great, and I ended up putting 2 tiny screews between every quarter so it's all held in place as…
Page still under construction. Need to add a few more stls for surface covers. And update with a BOM + Instructions
Bucket grit guard that traps any dirt and debris on the bottom of the bucket. Added stronger version (V2) with thicker walls. You can scale or resize it to fit Your bucket. Use atleas PETG or ASA/ABS etc.
I was creating a Geordi La Forge visor for a friend and thought it would be awesome if it "floated" for display. Looking around the "verse" I found this table and really liked how the arm options looked. I decided to remix it and add a…
I found this model which looked really cool but didn't have a good base. I remade it from scratch in Fusion 360 (F3D file included) to include a base and also have smaller holes sized for monofilament fishing line. Assembly involves…
Introducing the Gritty Grate Clay Tile & Coaster Press and Drying System PROTOTYPE by yours truly. This system is best printed in FDM or SLA with a build volume of at least 147mmx147mmx140mm. I've printed these out of PLA+CF, PLA, and…
The design concept is pretty simple and straight forward. It consists of the following piece types and quantities: x2 compression pieces. x2 base. For a complete set, you will need to print all 4 pieces , have a string or a ball chain…
This was an idea I had been wanting to try out for some time. I wanted to experiment with more fluid shapes in 3D CAD, and also see if I could apply a spiral shape to a tensegrity assemblage. In addition to the prints provided here, this…
This is another Tensegrity Table, but instead of one wire holding the upper part up and multiples pulling it down, it uses 3 to hold “up” and gravity to pull down. An optical illusion, though it only takes perhaps 10 seconds to figure it…
Open the 3MF file with PrusaSlic3r. I have not tested other slicers, your mileage my vary. 1. Change Label Text Choose “Open as project” Right click on “Text - 400” in the sidebar, select “Edit text” Use Emboss popout to change the label…
Making a 3D printed rocket is not hard. Making a LARGE (80mm by 1000mm or more) mid and high power rocket without throwing kilograms of filament at it. that's not so easy. making is ultra light and insanely easy to print Oh and requires…
A tensegrity is a stable configuration of bars and cables. The bars don't touch each other and are only connected via the cables. If the cables are very thin compared to the bars, the bars seem to float in mid-air. The position and length…
Inspired by what fellow V1E maker @PeterH already did for round sanding disks (which I printed and it's great). 😊 I'd class this as a remix except that every single polygon and face was done from scratch. Nevertheless, a lot of credit to…
Ein Behälter für Nähreste für eine Gritzner 788 Overlockmaschine. Jedoch 20 mm breiter als der originale! Die angebrachten support Stützen kann man schön mit einem Seitenschneider entfernen. A container for sewing waste for a Gritzner 788…
I needed a grit guard to get the grit off a wash-mitt. This one is designed to be 3d printed, using as little material as possible Category: Automotive
Western Movies - True Grit - 2010 3D printable model.
Do you want a floating tensegrity table that doesn't wobble like a banker? Of course you do. This is the table for you. Watch the video to see how its done. The Drum is used to quickly adjust the angle of the table. The center line wraps…
Layer height is 0.15mm (60% of originals 0.25 mm)
A 3D-printed insert designed to enhance the performance of the Degritter ultrasonic record cleaner. The Spider Mod helps dirt and debris settle more effectively in the water tank. This reduces the amount of contamination that recirculates…
Here is a version of my Symmetric Tensegrity Table, done in wood and metal. Of course, it's really all just plastic (wood filled PLA and Silver Silk PLA), but it looks pretty believable. The table uses transparent nylon lines for a better…
You will need to print two of the files. In the picture, there are arrows and lines. The red arrows all need to be the same length. I made mine 3.5 inches, but feel free to customize the length. The green arrow is the main support. I made…
To finish this model, cut three lengths of fishing line and string them through the four sets of holes, as shown in the picture below. Print Settings: Rafts: No Supports: No Resolution: .2mm Infill: 25% Filament material: PLA, ABS, PETG…
This is my fifth, and final, model from my deep dive into tensegrity. Learned a lot, all in all I've created 5 models. All 5 of them are downloadable here on Printables.com, COLLECT them all! I find things like this fascinating. At first…
This is my deep dive into tensegrity models. I have a few more coming. Learned a lot, all in all I've created 5 models. I'll post them when I can here. I find things like this fascinating. At first glance it defies gravity, you can't push…
If you print this, please post a make, leave a like, and comment. I would love to see someone else print this, and, get some feedback maybe. I made this on a whim because I wanted to. It's a really easy print, only needing a little…
Grit Guard for 10l bucket
Replacement slider door for a Matchbox 70B Grit Truck
The parts of this remix are a little more solid than those of the original model. Print instructions Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.15mm Infill: 100% Filament: Geeetech PLA Black Print Settings…
This is my fourth contribution to the topic "Tensegrity". The main difference to the other models is that the tension in the middle is not created by a thread but by magnetism. Therefore the top is of course not as loadable as with a…
Supports Are Needed . Use 4 Strong Strings and tie them in the showed places. You Can Resize The Model By Remix it / or on Your Slicer . Enjoy & Share your prints with me !
I thought I was done making Tensegrity models, but this makes #6! This is a variation (or remix if I will) of one of my other tensegrity models I made, which you can also find here on Printables. Link below: Triangle Tensegrity by Sanford…
Another variation on the tensegrity tables that everyone has been printing. In general, most of them I've seen have been interesting, but really, really ugly! This is attempt to make something more attractive looking. see:…
This is a tensegrity dragon, the way the dragon is attached to it's base with strings gives the impression that it floatThis is a tensegrity dragon, the way the dragon is attached to it's base with strings gives the impression that it…
Please note as of the time of uploading, I have been unable to print the full design due to a lack of filament. I have however printed the assembled parts and confirmed they fit together as intended. Tolerances are fairly tight though, so…
After printing the parts for a floating tensegrity table (see the remix source) and assembling the hardware, I realized that I wasn't looking forward to trying to thread this and get the right estimated lengths before tensioning. So, I…
Store your sanding discs easily with this 7 grit (or 6 + mandrel) storage unit. Optional lid makes storing on its edge easy. Printed in PETG but any material should be fine.
Summary Section: An incredible umbrella model with two umbrellas in tensegrity with each other. It features lightning bolts and even a person who lives in the umbrella. It fits within a 15x15 box and is about 23 cm tall. This was a team…
Problem Statement: With a partner, you will design and create a single custom Tensegrity Structure of equal complexity or greater as the tables depicted above (as determined and approved by the instructor). General Advice: We worked on…
Summery: Designed by Dab (Rishab and Dante) - A beautiful decorative tensegrity model with a cloud, wave, and lightning bolt. It has a really cool design to make it look like a stormy sea. It uses fishing line. Here is the link to the…
Summary (Continued): Impress guests while marveling at the physics of the universe in style with this tensegrity structure. Created in tandem with @Rishisafish , this group project was a blast, and you should check out their profile as…
This charging cradle is a remix of https://www.thingiverse.com/thing:4726435. I have added some noses to keep the charging cable in place without glue. You have to print it back-side down and enable supports.
The thread in the middle of the two brackets - besides the four threads connecting the pen box and the base - builds the tension in this object. It's a bit magical how the physical conditions create a tension that makes this object a unit…
U need to print 2 bases The chains in the middle will open in about 12 hours
Inspired by u: erniec53 's Single-string Tensegrity model, I needed an editable design so I could print the tension brackets flat for better strength. Print Settings Rafts: No Supports: No Resolution : 0.2 mm Infill: 35% Filament : any…
It's a small tensegrity table as print-in-place (PIP) model with single thin filament bridges as trings. Two sizes (30mm and 40mm cubed) and two styles: “full” - the normal type with one load string in the center and 4 stabilizing strings…
Einstellbare Saumführung für die CoverStyle 4850 und div andere mit M4 Gewinde
I've always been inspired by interesting mechanical phenomena, so I figured I would incorporate the tensegrity design into a pen holder. Since I'm in the medical device field and have access to very thin, strong wire, I will be attempting…
Top dish with soap is suspended in air by 5 tensioned zip ties. Using zip ties instead of strings or wires makes assembly much easier. You will need 10 at least 100 mm long 2,5 mm zip ties. Build: Cut off the locking part from 5 zip ties.…
