205mm Grit Guard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small sized grit guard for ~8" bottom buckets
- Ocena
- 4,8 / 5
- Polubienia
- 82
- Pobrania
- 920
- Wydruki
- 10
- Wyświetlenia
- 3838
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
A grit guard sits in the bottom of your wash bucket in your wash solution. It allows the dirt and debris that gets stuck to your wash sponge/mitt/towel to fall through the grate and rest in the bottom of your bucket preventing re-contaminating during your wash process.
There are plenty of 12" grit guards on the market but I needed a smaller one for a 2 gallon bucket used in a part of my detailing process. This one is 205mm diameter which is just a hair over 8". You can of course adjust proportions in your slicer to fit your needs.
I printed in PETG with 3 perimeters which makes it solid and it doesn't float.