205mm Grit Guard
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small sized grit guard for ~8" bottom buckets
- Rating
- 4.8 / 5
- Likes
- 82
- Downloads
- 924
- Makes
- 10
- Views
- 3,847
- Reviews
- 10
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
A grit guard sits in the bottom of your wash bucket in your wash solution. It allows the dirt and debris that gets stuck to your wash sponge/mitt/towel to fall through the grate and rest in the bottom of your bucket preventing re-contaminating during your wash process.
There are plenty of 12" grit guards on the market but I needed a smaller one for a 2 gallon bucket used in a part of my detailing process. This one is 205mm diameter which is just a hair over 8". You can of course adjust proportions in your slicer to fit your needs.
I printed in PETG with 3 perimeters which makes it solid and it doesn't float.