Car wash bucket grit remover quarter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I could not fit the original thing on my build plate (it's 200x200) so i decided to cut it to a quarted size and print…
- Ocena
- 5 / 5
- Polubienia
- 43
- Pobrania
- 174
- Wydruki
- 3
- Wyświetlenia
- 785
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
I could not fit the original thing on my build plate (it's 200x200) so i decided to cut it to a quarted size and print 4 pieces :).
It worked great, and I ended up putting 2 tiny screews between every quarter so it's all held in place as one object, not 4 separate objects.
Print Settings
Printer Brand:
Wanhao
Printer:
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
100%
Filament: Vox PLA White
Notes:
Make sure to print the thing with the flat side next to the build plate and you won't need any support to print it.
Category: Automotive