Simple Threaded 30x36 Jeweler's Loupe Case / Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
simple threaded 30x36 jewelers loupe box/case
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 183
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Sometimes, I need a jeweler's loupe to inspect small pieces. Unfortunately, after a few months, it always ends up in the trash because the lens gets badly scratched, and the loupe doesn’t come with a case. While the item is inexpensive, it feels wasteful to order a new one twice a year. :)
To solve this, I designed a box that fits a 30x36 jeweler's loupe (magnifying glass). Check out the pictures for an example! The loupe has a diameter of roughly 42 mm (including the outer ring).
The box and lid are threaded, making them easy to print and fit together nicely. I also recommend adding a 1mm foam sticker (or similar material) inside the box for added protection against drops. The same can be applied to the side walls for extra cushioning.
Maybe I’ll create a version 2 in the future to improve the aesthetics :D :D, but for now, this design works perfectly fine!
I printed it in PLA at 0.2mm layer height.