Simple Threaded 30x36 Jeweler's Loupe Case / Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
simple threaded 30x36 jewelers loupe box/case
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 37
- Makes
- 0
- Views
- 179
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Sometimes, I need a jeweler's loupe to inspect small pieces. Unfortunately, after a few months, it always ends up in the trash because the lens gets badly scratched, and the loupe doesn’t come with a case. While the item is inexpensive, it feels wasteful to order a new one twice a year. :)
To solve this, I designed a box that fits a 30x36 jeweler's loupe (magnifying glass). Check out the pictures for an example! The loupe has a diameter of roughly 42 mm (including the outer ring).
The box and lid are threaded, making them easy to print and fit together nicely. I also recommend adding a 1mm foam sticker (or similar material) inside the box for added protection against drops. The same can be applied to the side walls for extra cushioning.
Maybe I’ll create a version 2 in the future to improve the aesthetics :D :D, but for now, this design works perfectly fine!
I printed it in PLA at 0.2mm layer height.