Pixel 9/Pixel 9 Pro Inductive Charger Base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model is a easel-like stand to charge a Pixel 9 or Pixel 9 Pro mobile phone.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 509
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This charger stand will hold a Pixel 9 or Pixel 9 Pro with most cases in the proper position for charging. This may work for the XL sized but it was sized specifically for the smaller models.
The charger itself snaps into the base (with a little persuasion) and the cable snakes out the back through a cut-out.
The rubber feet are optional. The template is to locate the feet neatly in position.
I used:
AMOLEN Walnut Wood PLA (https://www.amazon.com/dp/B088BRY1PN?ref=ppx_yo2ov_dt_b_fed_asin_title)
.4 Nozzle
,12 layer height
Materials:
Charger - Amazon https://www.amazon.com/dp/B0BXT34PXG?th=1
Rubber Feet - Amazon https://www.amazon.com/Adhesive-Drawers-Furniture-Dampening-Transparent/dp/B08NX9KXQP/ref=sr_1_1