Headband for DCA Stealth and Expanse
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A headband for the Dan Clark Audio Stealth and Expanse. Included are 8 different lengths in 5mm increments.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 248
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Print settings
Printed with special settings to achieve this result, refer to included 3MF file for settings. You can experiment with the type and amount of infill to achieve a different look.
A wee bit of post processing around the holes may be required due to elephants feet.
I used PLA for this but virtually any filament should work alright, though a slightly flexible one like PA might be ideal.
Requires around 10g of filament and takes 32 minutes to print with a 0.60mm nozzle and 0.20mm layer height.