Liczymy pasujące modele…
This is a 3D printed model of a generic Corvette Class Light Frigate of the MCRN from the tv show the Expanse. This particular ship is named the Phobos. The ship has several features: - Retractable PDCs - Openable Torpedo tubes with…
This is my take on the Morrigan Class Patrol Destroyer from the MCRN. It is done to scale to my Rocinante model. The model is once again kit so no glue needed. It has two features: Retractable PDCs - the same as on the Roci. Retractable…
This is my MCRN Donnager class model from the show the Expanse. Model is some 35cm long and comes with a stand. It is a kit so it does not require a single drop of glue to put together. I highly recommend to use the following video in…
This is a 3D printed model of a Orion Class Heavy Frigate of the MCRN from the tv show the Expanse. This particular ship is named the Deimos. The ship has several features: - Retractable PDCs - Openable Torpedo tubes with torpedos -…
This is my model of the Raptor Class Light Cruiser from the Show the Expanse. This ship appeared as the infamous Pella in the Free Navy colours. I however made it in its original MCRN colours and with my own name. (The colour structure is…
This is my model of the Scirocco Class Heavy Cruiser from the Show the Expanse. The model is a kit and does not require any glue. Unfortunately it is not done in scale with my previous MCRN ships as that would mean the ship would reach…
This is a 3D printed version of the Amun Ra Class STEALTH Frigate from the show the Expanse. The model is not the most accurate but is still not bad. Assembly does not require a single drop of glue as it fits all together like a kit. The…
A Wallmount for the huge Ship: I printed it in PLA but had to use an angle out of metal for support, so you should use at least PETG and 25% filling. Before you assemble the Raptor Class it is best to only use the parts of the belly to…
I just picked up the first three books of the James S.A. Corey series that is the basis for the sci fi show The Expanse. I have to have something to mark my pages while I wait for season 3. I found the image file on google and used…
Print settings Printed with special settings to achieve this result, refer to included 3MF file for settings. You can experiment with the type and amount of infill to achieve a different look. A wee bit of post processing around the holes…
The goal of this project was to build the throwable LED-"Grenade" used by Jim Holden in the series The Expanse. Steps: Print two main structures in Gray/Black PLA. Print 12 translucent/transparent PLA inserts. Optional: Print the TPU…
This is a Hueforge STL Bookmark of Leviathan Wakes 10th Anniversary Edition that I scanned from the dust jacket and edited in Photoshop. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm with Arachne Wall…
This is a Hueforge STL Bookmark of Abaddon's Gate Collectors Edition that I scanned from the dust jacket and edited in Photoshop. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm with Arachne Wall Generation…
This is a Hueforge STL Bookmark of Caliban's War Collectors Edition that I scanned from the dust jacket and edited in Photoshop. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm with Arachne Wall Generation…
I've had the idea for these bookends flying around my head for the last two years, and finally got around to building them. My part of this model is a basic bookend with the Ring Gate from The Expanse. I then used the Rocinante model from…
This is a personal fan art project inspired by the universe of The Expanse. As a professional architect with a passion for science fiction, I wanted to reimagine the spaces and structures that might exist in this incredible world. I’ve…
Inspired by the SpaceX-Coaster ( https://www.prusaprinters.org/prints/88-spacex-landing-pad ) I made a coaster with the pinup girl logo on the Rocinante spaceship from the series The Expanse. As the logo is not my property please note the…
This is the Protomolecule case used on Tycho Station during The Expanse, Season 5. I did not model this myself, I used the Makerlab Image to 3D Model application to generate this from a piece of work made by Lee Fitzgerald, posted on…
This is the Protomolecule Hybrid (figure) as seen on The Expanse. I used the Makerlab Image to 3D Model to create this - which turned out quite exceptional if I say so myself! I used normal, snug supports and they came off easily and…
This is one of the "Tiller" machines discovered on Ilus from The Expanse. The Expanse is by far one of the best Sci-fi/Sci-fact series and my favorite of all. This is a Tiller machine from the planet Ilus. There are (2) of them here, each…
Increased the size and split into two pieces for printing on my Prusa MK3. I also designed a base that holds it at this particular size. Assembled stands 280mm tall. It can be reduced but I have no idea if the stand will work at a reduced…
This is my Rocinante model which is supposed to represent the Rocinante ship as it featured in the very last episode of the season 6 of the show Expanse. It has CSL plating, railgun, PDCs and torpedo tubes. The model is 50cm long and has…
Happy Holidays, Inyalowda! An Expanse-inspired Christmas ornament made from the OPA's logo. A quick and easy print. It'd look fine printed in a single color, or printed and painted, or better yet do a filament swap for two-color goodness!…
I've long wanted to build a replica of the bullpup rifle used by the Martian Marines in The Expanse, and I decided it'd be fun to do so as a remix of the awesome Lynx by Orion Blasters. This is the first time I've ever released a set of…
I have gained a fascination with The Expanse, so I modeled one of the drone types. It fits well on backpack zippers, keychains, or if you are Sci-Fi enough you can put on on your christmas tree. Enjoy.
I’m a huge fan of The Expanse and wanted to incorporate some of the faction logos with the grips for DeSteiner’s 1911 mechanically working Prop Gun Pistol. There are grips for: MCRN, OPA and Amos' Devil pin. (as with any part that’s been…
Model of the Rocinante with MCRN logos. Added plenty of extra details to the relatively low quality model provided by SyFy. Print with 0.4mm nozzle and 0.2mm layer height or better. The guns were made by Gaz23, who seems to have deleted…
I made this box with The Expanse from the dice box of Becker Thorne . His model can be found : https://www.prusaprinters.org/fr/prints/102655-3d-printed-dnd-dice-shadow-box
The Expanse set of coasters I designed some time back. Enjoy keeping your beverages elevated!
Fans of The Expanse, show off your Martian Pride with this flag for the MCR (Mars Congressional Republic) Print instructions I designed it to be printed in 4 layers. The bottom layer is 2mm high, in red. Then the remaining layers are each…
A Wallmount for the huge Ship: I printed it in PLA but had to use an angle out of metal for support, so you should use at least PETG and 25% filling. Before you assemble the Raptor Class it is best to only use the parts of the belly to…
Modeled after the uniform version of the logo. Enjoy. Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Notes: I used the prusa color changer tool to stop at 4.3mm and change to a…
NOTE: [To make the black Eye dots easier to print i simply had them at 200% in size in the slicer and it turned out great.] Did a simple mutlicolor remix of this one in meshmixer, just separated the Main body, Eyeballs and Eye dots so it…
I just picked up the first three books of the James S.A. Corey series that is the basis for the sci fi show The Expanse. I have to have something to mark my pages while I wait for season 3. I found the image file on google and used…
Not sure how the original got away with no supports, but printed in PLA with supports. Fits the OnePlus 7 Pro in a transparent TPU bumper case, basically this one:…
Red bits Purple/Blue bits (carbon silicate laced armor) Black bits Light Gray bits (Silk) Dark Gray bits Slices better with PrusaSlicer 2.4.0 (rather than 2.4.1 or 2.4.2-rc2) Simply load up each .3mf file as a project into [at least]…
Remix from Martin's great model of the Rocinante. Each PDC uses two 6x3mm magnets.
Hi Darren, I've sliced it up as best I could to a possible print. Please check that sizing suits your needs also. I'm not even sure you could wear it because the neck seams small and may need to be in seperate pieces to fit on your head.…
The MCRN Scipio Africanus is a Light Frigate equipped with dual torpedo tubes and twin PDC emplacments. The vessel was designed and built by the Martian Colonial Navy to serve as a escort, boarding craft or patrol vessel.
Another Mask Ear Saver. This time Expanse themed. These are intended to be printed for those heroes out there doing a dangerous job. Please give any that you print away to worthy people. Print instructions Prints well with 0.15mm Quality,…
This is the control panel for an Expanse "O2 Backpack". Decals, side handles, and upper hose plate included. The v8 design is made for a "TFT FeatherWing - 2.4" 320x240 Touchscreen For All Feathers" display from Adafruit:…
Modified some panels and added torpedo tubes and hatch to Martin's model. Added a stencil to help paint the ship name.
Modified some panels, added torpedo tubes, added hatches and new stand to Martin's model.
This is a more accurate and printable rendition of a Martian PDC from The Expanse. The PDC rotates on the turret and the turret itself can articulate on the mount. I made this model from the ground up to work with Martin's Rocinante (…
Started making badges for every scifi series I've seen so far. This time it's a badge for “The expanse”. Have been looking for a badge in this style and couldn't find one so I had to do it on my own. Hope you like it. If you got any…
This is a car badge inspired by the Expanse ship Razorback, with the outline of a 2019 Mercedes GLC added. I will add any other custom car outlines in place of the GLC300 that you like: if you agree to post a make, or make a donation to…
This is sketched from a screenshot capture of a Star Helix pistol from S1-3 of the Expanse. 9 parts that should make it easy to paint and assemble. Photos are of my initial sizing and test build. The photo is of the print totally…
Fake Space Suit Lights for your Expanse Cosplay. These do not have the vendor plastic diamond on em. However I think they look better. Print the body in a solid color, and the Lense files ( 1x Center, 2X Side) in clear PETG. Print…
MCRN Scirocco Class Assault Cruiser from The Expanse. It measures about 495mm from the tail to the tip of forward antenna. Almost all the pieces were printed not using supports. I used supports on three of the mid-section structures. The…
Here is my own interpretation of the razorback form The Expanse. The model is design at 1:30 and mesure around 67 centimeter height but designed to be undersized until 34 % size without issues (1:90 scale - 23 cm height). It can be…
The Dropship was printed on a Prusa MK3S+, 10% infill, 0.15mm, no supports. The model measures around 188mm.
Wrist Phone holder for Galaxy S8. V9 is more "Screen Accurate" thank you for the excellent screenshot. Helped a lot. It's designed for a phone 80x160x16. So you can scale the model proportionally for whatever size your phone is. The…
These are the add-ons that I made for the Syfy (now Amazon) Expanse helmet ( https://www.thingiverse.com/thing:2127463 ). Lense Covers are printed in Novamaker Clear PETG. https://www.amazon.com/gp/product/B0746DXJ8F/ Face Jets are…
The UNN flag from the Expanse TV series. I've included the colour change .gcode from PrusaSlicer.
Coaster/plaque of the logo for Eros Station, before it ended up on Venus, obviously.
The logo for the Mao-Kwikowski Mercantile corporation. The company that made Jules-Pierre Mao enough money to nearly destroy humanity (in The Expanse). Thankfully, the crew of the Rocinante was there to stop him. And they added a crew…
Coaster (or plaque) of the logo for Ceres Station. 3 levels, White > Red > Grey/Black
Enjoy this coaster, and always remember the Cant! Printing slightly larger helps with the detail… source material is “spray paint” looking, so not a solid a design, lots of little gaps.
Remember the Cant. Badge/patch for the Canterbury under operation of the Pur & Kleen Water Company. Mess with the vertical scale until you're happy with it. I shoudl have given the color layers more height, and less to the base. I went…
Found this cool logo on the internet. Quickly redraw it in vector and made a 3d printable version in Fusion360. Enjoy! Personal use only! Not for sale. Print instructions Do a simple color change when base color finished.
Here is my own interpretation of the UN One form The Expanse. The model is design at 1:100 and mesure around 52 centimeter long but designed to be undersized until 40 % size without issues (1:250 scale - 21 cm long). It can be printed on…
Consider printing z at half scale. Use a low layer height so that the layers of the Roci show up properly.
This is a PDC I created from the ground up in Blender using reference images from the show The Expanse. I have another variant of the model out there, but this one is closest to the show's PDC, while still being printable with an FDM. I…
Tycho Station from The Expanse. This is a work in progress. In the end it will fit into a "Behemoth"/"Nauvoo" base. 9/6 B4 v1 files:(current) Split in 1/2 along the ring level with added peg holes for the side antenna's. Files for Side…
My second Expanse Bookmark, it's 19.5cm long by 2.6cm wide. I've included the PrusaSlice .gcode for the colour change as well as the normal .stl. If you're interested in Expanse merchandise then this email from Master Replicas will be of…
Drummer's neck tattoo symbol as a coaster, with the font from the Expanse saying “Beltalowda”. Printed in 2 levels, black then light color (I use silver). Enjoy.
Drummer's neck tattoo symbol as a coaster, with the font from the Expanse saying “Bosmang”. Drummer is 100% the bosmang! Sasa ke? Printed in 2 levels, black then light color (I use silver). Enjoy.
Coaster of one of the patches on Amos' suit. Printed in three levels, black > blue > white.
Drummer's Neck Tattoo - In Coaster form. Round or Square available. Designed in two levels, I did black > silver.
One of Amos' patches, and maybe the logo used by the Free Navy.
A coaster with Amos' famous line. Done in 3 levels, black, silver, then black again (for the upper rim).
Just in case you need the code word to stop being blown out of the sky by the MCRN.
logo for the Transport Union, headquartered on Medina Station. Oye Beltalowda.
Just a little representation of some of the artwork from promotional material of The Expanse.
Both version of the MCR/Martian flag from The Expanse.
This is a model of the Donnager from the popular sci-fi show The Expanse that i modeled for practise It is necessary to adjust the components in the slicer so that it may be printed correctly with minimal supports. You can also print a…
This is an approx 1:85 scale model of the Razorback from "The Expanse". Few pieces which klick together. Thrusters have to be mounted with screws, which also hold the inner frame together. Core needs to be printed upside down. Usually no…
This is Epstein's Yacht from the series “The Expanse”. It was created by Chris Kuhn and posted by owlstraw on Sketchfab as a 1pc model . The Expanse is one of my all-time-favorite series and love the many different spaceships and unique…
The Magnetar-Class was a type of ship employed by the Laconian Empire.
WARNING: The support bars on the front and back of the ship are fragile. I STRONGLY recommend using a resin printer for this.
Wanted to make some drink coasters but wasn't sure what design to go with. While searching, I stumbled across the idea of The Expanse logos and turning them into coasters. I took some existing OPA logos, traced new versions in Fusion360…
The Pulsar-Class fast destroyer. the most notable ship of its class is the Gathering Storm.
Tycho station patch, tag - 3 color no AMS (The Expanse)
Increased the size and split into two pieces for printing on my Prusa MK3. I also designed a base that holds it at this particular size. Assembled stands 280mm tall. It can be reduced but I have no idea if the stand will work at a reduced…
Complete your Orion Class DEIMOS-537 ship display with this specially crafted sign. Designed to complement the sleek aesthetics of your model on the custom wall mount, this sign adds the perfect finishing touch. Elevate your display…
Complete your Assault Cruisers ship display with this specially crafted sign. Designed to complement the sleek aesthetics of your model on the custom wall mount, this sign adds the perfect finishing touch. Elevate your display…
Complete your Corvette Class ROCINANTE-158 ship display with this specially crafted sign. Designed to complement the sleek aesthetics of your model on the custom wall mount, this sign adds the perfect finishing touch. Elevate your display…
Complete your Corvette Class PHOBOS-365 ship display with this specially crafted sign. Designed to complement the sleek aesthetics of your model on the custom wall mount, this sign adds the perfect finishing touch. Elevate your display…
Farben 1 Blau/blue 2 Weiß/white 3 Silber grau /grey 4 rot/red, orange/orange, braun/brown (je nach modell) 5 schwarz/black
Follow me so you don't miss my next models from The Expanse Update : I modified two files ("Fire selector" and "safety 2of2" because on FDM printers it was too complicated to reproduce the small details. So I'm making available an FDM…
Follow me so you don't miss my next models from The Expanse Please respect the orientation of the objects (see picture of the plate and/or the 3MF file containing the plate. And don't forget to “place on face” all STL because they are not…
Update: A maker pointed out that the “Slide Top” file was missing, so it was added. If you downloaded the model before 25/07/24 please download the file named “Slide Top”. Sorry for the inconvenience. For those who have already downloaded…
I remixed this awesome design by @Dustin to enable MMU3 printing on the same layer. Printed on a textured print sheet to help hide any layer lines. If printed on a PEI smooth sheet, you can touch it up with a heat gun to get rid of any…
This is my version the MCRN Landing Skiff from the show Expanse. The model is in scale with my other MCRN ships and comes with retractable PDC, Retractable engines, openable main hatch and “posable” guns. It is a kit and does not require…
![Cromulons from the 5th expanse [Multicolor Main Head Remix]](https://media.printables.com/media/prints/164813/images/1530976_3a1a018a-1b8a-49c5-a8ee-417b07b6f477/large_display_20191031_174859_164813.png)
