UN One From THE EXPANSE TV show - 1:100 Scale
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Model of the UN One from the TV show THE EXPANSE at 1:100 scale (52cm long)
- Ocena
- 5 / 5
- Polubienia
- 61
- Pobrania
- 355
- Wydruki
- 2
- Wyświetlenia
- 1519
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- Creative Commons — Attribution — Share Alike
Here is my own interpretation of the UN One form The Expanse. The model is design at 1:100 and mesure around 52 centimeter long but designed to be undersized until 40 % size without issues (1:250 scale - 21 cm long). It can be printed on a standard Printer or with MMU.
Here is printing size and scale table guide :
| Printing size | Scale | Lenght | comment |
| 100% | 1:100 | 52 cm | almost same scale than MartinTaichl's Rocinante (1:90) |
| 67% | 1:150 | 35 cm | |
| 50% | 1:200 | 26cm | |
| 40% | 1:250 | 21 cm |
The details on the shell are embossed to facilitate the painting both in prusa slicer in case of MMU and with a brush.
The 100% size print needs around 1,4Kg of filament and 250 hours of printing.
INFORMATION : to avoid the theft and resale of 3D models, an annotation has been added to some 3Ds, however this annotation is small enough to be ignored by the slicer when slicing.
Here is the assembly instructions :



