1 / 5
Roll holder for filament rolls for the (un)original Prusa box. — zdjęcie 1
1 / 5

Roll holder for filament rolls for the (un)original Prusa box.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The reel holder for the box was designed to be as stable as possible while stabilizing the reel inside the holder.

Ocena
0 / 5
Polubienia
10
Pobrania
46
Wydruki
0
Wyświetlenia
244
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Share Alike

I have designed this reel holder to be as stable as possible. The holder was tested for 1kg castors, 2kg and 3.5kg castors. It has small bumps that hold the rolls inside the roll guide. The design is such that the filament cannot wrap around the rollers and self-wound rollers also fit on it. Care was taken to minimize rolling resistance. The file contains 4 parts (i.e. for one roll). The nubs ensure correct assembly and provide additional stability. 
 

Material per roll carrier

  • 2 ball bearings (size ball bearing 8x22x7(608ZZ inner diameter = 8 mm, outer diameter = 22 mm, thickness = 7 mm) and 
  • 2 x M3x16 screws 
  • 2 x 6-edge nuts 

Tagi