1 / 5
Roll holder for filament rolls for the (un)original Prusa box. — image 1
1 / 5

Roll holder for filament rolls for the (un)original Prusa box.

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Preliminary estimate for PETG

€4.84 – €5.92 net (excluding VAT)

For file: Dev_Kombination_Komplett_0.4n_0.15mm_PLA_MK4ISMMU3_4h56m.bgcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €5.38 excluding VAT (range midpoint).

Weight reported by the author
82 g
Print time reported by the author
4.94 hr
Source material
PET
Estimate material
PETG
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

The reel holder for the box was designed to be as stable as possible while stabilizing the reel inside the holder.

Rating
0 / 5
Likes
10
Downloads
46
Makes
0
Views
246
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Share Alike

I have designed this reel holder to be as stable as possible. The holder was tested for 1kg castors, 2kg and 3.5kg castors. It has small bumps that hold the rolls inside the roll guide. The design is such that the filament cannot wrap around the rollers and self-wound rollers also fit on it. Care was taken to minimize rolling resistance. The file contains 4 parts (i.e. for one roll). The nubs ensure correct assembly and provide additional stability. 
 

Material per roll carrier

  • 2 ball bearings (size ball bearing 8x22x7(608ZZ inner diameter = 8 mm, outer diameter = 22 mm, thickness = 7 mm) and 
  • 2 x M3x16 screws 
  • 2 x 6-edge nuts 

Tags