Singer Surefit bobbin for Inspiration 4200 series models
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bobbin for Singer Inspiration 4200 (4205, 4206, 4210, 4212, 4220, 4228) series sewing machines
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 53
- Wydruki
- 2
- Wyświetlenia
- 222
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
A bobbin for Singer Inspiration series 4200 sewing machines. It is design to interlock with the machine's bobbin winder pin the same way as the original bobbins.
Source file for Fusion 360 included
Printing instructions
It prints in two parts without support and the bottom part is design to spin easily in the machine (it is rounded in a similar way as the original bobbin shipped with the machine). Requires glueing the two parts together with CA glue (the bottom part is prepared to fit the shaft nicely with 0.2mm tolerance)
Print settings:
- layer height: 0.2mm
- perimeters: 4
- infill: doesn't matter, leave at default (ex. 15%)
- no supports required
- prints well with PLA