1 / 6
Singer Surefit bobbin for Inspiration 4200 series models — image 1
1 / 6

Singer Surefit bobbin for Inspiration 4200 series models

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A bobbin for Singer Inspiration 4200 (4205, 4206, 4210, 4212, 4220, 4228) series sewing machines

Rating
0 / 5
Likes
5
Downloads
53
Makes
2
Views
222
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Share Alike

A bobbin for Singer Inspiration series 4200 sewing machines. It is design to interlock with the machine's bobbin winder pin the same way as the original bobbins.

Source file for Fusion 360 included

Printing instructions

It prints in two parts without support and the bottom part is design to spin easily in the machine (it is rounded in a similar way as the original bobbin shipped with the machine). Requires glueing the two parts together with CA glue (the bottom part is prepared to fit the shaft nicely with 0.2mm tolerance)

Print settings:

  • layer height: 0.2mm
  • perimeters: 4
  • infill: doesn't matter, leave at default (ex. 15%)
  • no supports required
  • prints well with PLA

Tags