T-BEAM LORA SMALL BOX IPEX
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here is a smaller box for the T-beam lora card from Lilygo . with or without push button and window for screen
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 144
- Wydruki
- 0
- Wyświetlenia
- 1700
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hello here is a small box for Lilygo T-beam cards.
For this card LoRa GNSS NEO-M8N and NEO-6M card in ipex.
Some short tests with water projection and immersion.
The box resists well, no trace of water in the case.
Only with ipex plug for the T-beam , sma plug output.
25x25 gps antenna, with or without 9.6 or 1.3 inch screen, with or
without push button 12 mm for the menu (io38).
Batteries : 1 or 2x 18650 / 21700 , 2x batteries only with no button.
Provide 8 M3x16 screws and 4 M2x10 screws.
Seal 2mm.
1 x female sma pitgall output/IPEX 8 cm
For the screen window 1x 1mm Polycarbonate Sheets .
Print instructions :
Material: PETG OR ASA
Nozzle: 0.4mm
Layer Height: 0.2mm first layers after 0.15mm
Perimeters: 6
Infill: 100%
Don't forget to indicate that you like the model on printable.com.
Please send your opinions for future improvements.
and take the opportunity to see the older models.
73 F1NSR Yannick.