Liczymy pasujące modele…
I was making a modification to the EVA 2.4.2 toolhead that allowed the use of a Rapido UHF hotend. I tried to find a STEP model for it online but after ~30m of searching, I couldn't find the ultra high flow (UHF) variant as a model. I…
Update : I'm going to leave this post up, but I would recommend AGAINST using my files for this mod. Instead use the github project below that is more complete.…
This is a simple revision to the StealthBurner Print head for Phaetus Rapido 2 to fix the next-G.The neXt-G is the same overall height as the Rapido but does not taper towards the top. I just made the model fit the neXt-G width. This is…
The reason I made this toolhead was to take advantage of Phaetus's hotend attachment for their APUS extruder, and more importantly I just like how the wheel spinning on the apus looks. Fusion files can be found here:…
Mit hilfe dieses Adapters könnt ihr das beschriebene Hotenend problemlos auf den Vyper (Standardkopf) von Anycubic montieren. 3D-DRUCKEINSTELLUNGEN Slice 0,1mm 60mm/s PLE
phaetus dragon uhf filament cutter for the ercf v.2 this model is reworked by me @lillhonk using @EMJAY276 design link to the original page: https://mods.vorondesign.com/details/WHujVxn8HnZet0yB8vHxJg to make it compatible whit the…
Requires two hot melt inserts. I placed the wiring on the outside so that it is easy to reach and has a smaller x-offset for the probe. I printed mine with ASA at 100% infill.
You'll need to make some changes yourself (probably) This configuration deviates from “stock” in a few ways. I am posting the STEP files here so that it may save someone else some modeling time…. but for now I can't be bothered to mod for…
Requires two hot melt inserts. I placed the wiring on the outside so that it is easy to reach and has a smaller x-offset for the probe. I printed mine with ASA at 100% infill.
A modified left mount that fits the BLTouch/probe on the inside of the mount. This reduces the distance from the nozzle, decreasing the x/y runoff needed to probe the whole bed. x_offset: -20 y_offset: -17
Print with UV-stable filament (e.g. ASA) for outdoor use. I used 0.16mm resolution to get good threading. Depending on your printer, you might have to enable and adjust internal compensation when slicing.
Modified the UHF mount to mount to the Cartographer Cnc mount without having to modify the Cnc mount
I love the Ultralight design by MFBS Design and wanted to try and incorporate support for an LGX Lite v2 extruder. This is my initial version 1 attempt. As the shape and size of the LGX extruder and Ultralight do not accommodate each…
XOLcPAP UHF Ducts for direct fitting of the OD 18mm tube.
GME UHF Microphone Mount For Toyota Landcruiser 70/79 series with modern style dash -Works great with the factory head unit or aftermarket such as VHEADIA and others. -For use with GME XRS Mic clip/magnetic plate. Use GME provided self…
This is a reimagined V-Core 4.1 toolhead designed to be SLM metal 3d printed. All of the important features remain identical to the original design... nozzle to Beacon offset, duct placing at the nozzle, belt attachment points... this is…
MH-8800G/5 DYNAMIC UHF Microphones holder - Provide wall storage for 2 hand held microphones type MH-8800G/5 DYNAMIC UHF Microphones
What's an UHF without a vulcano nozzle? This model works just like the Rapido UHF, which uses an extender (expensive nut) for higher flowrates and properly heated filament.. In order accomondate the longer length I've adapted the model of…
Print using standard Voron printed parts settings.
Beifahrer Handyhalter hier für ein S23 Ultra hoch oder quer
This is yet another remix of the Stealthburner Rapido Printhead for the Rapido UHF. The thing that sets this one apart is, rather than extending the printhead as others have done, I reangled the cooling outlets and redid the internal air…
Remixed of the beacon mount for the rapido UHF to utilize the lgx lite extruder for Mantis toolhead. Modified files from the LGX Lite Mantis toolhead usermod by TheWarolf:…
Overview This remix of the EVA 3 Beacon Probe UHF Volcano Ducts is designed to be compatible with the latest Beacon3D Rev H, a high-performance 3D printer component that enhances precision and efficiency in the printing process. By…
Cartographer mount for Yavoth UHF cowl. Just add spacers for your Cowl/Hotend combination.
Simple little 3u tall nozzle holder for Rapido UHF spare parts
We purchased a a DBJ-1 antenna (https://edsantennas.weebly.com/) for our ham radio a few years ago back. This bracket I designed allows me to mount the antenna to an old TV antenna pole we have at the back of the house. We used a couple…
For the UHF stealthburner cover with CPAP and two piece PCB I loved this original/remixed design that was able to use a 2-part PCB for the CPAP Stealthburner cover but I was unable to fit any heat set insert I had. The cpap hose adapter…
I wanted to use some 4010 Vindr fans from West3d on my XOL. These fans have thicker mounting tabs so the supports behind the tabs on the XOL toolhead needed to be adjusted.
print in something heat tolerant, this thing sits pretty close to the hotend. attaches to the lower two screws that hold the toolhead board in place. this goes very near the printed part and may need some fine tuning depending on your…
NSK UltraLight Effector for Rapido UHF and 5015 Fans (BOWDEN)
Mount your BTT EDDY Probe on your Blackbird toolhead with zero changes to anything other than the fan cover! Make sure you have a UHF version. The short versions of the toolhead for HF models WILL NOT FIT! It must be something like the…
This is not a small size mjolnir, that is impossible due to interference of the xy joint. This is an archetype core for using a small size hotend on a medium size mjolnir. Basically, it can be used with any hotend that uses a combination…
Version 1: Added two mounting holes to support a Mellow Fly ADXL345 USB. BOM: M3 screws x2. M3 Washers x2 (Optional) Credit: Sir_Wash
Stealthburner x carraige with lowered probe suit Rapido UHF and Omron or Eddy probe. Larger hole for x stop wiring/plug.
Mount your BTT Eddy Probe to the UHF version of the Yavoth Toolhead. This will NOT work with the HF short versions! Prints with no additional supports, make sure your printer is set up well & you print to Voron BOM settings.
works as a drop in replacement for happy crab docks or the frame for the modular docks . you still need to print the rest of the SB docks, can be found here . part can be printed with the front face oriented on the build plate and support…
This stealthburner model includes the mounting of a Phaetus Rapid 2 Plus UHF hotend and a CPAP for cooling, retaining the possibility of also mounting the Canbus if desired
!!! This only works with G2E without modifying the Lancer Hotend !!! ---------------------------------------------------------------------------------- I bought an AWD Trident from Siboor and wasn't that happy with the Stealthburner…
Lowers the probe on the MGN12 x-carriage to suit the Rapido Plus 2 UHF length. The lower clamping nut and bolt have had to be relocated and you will need a shorter self tapping screw on one of the endstop switches. Apart from that, this…
This is a UHF/VHF dipole center mount that will deploy on a SotaBeams mast.
Own design based of specific dimensions from a customer requirement. This was to hold a UHF receiver in the car. Printed in PETG-CF.
I recently upgraded to a Phateus Dragon UHF hotend and needed to change up my mounting system and cooling options. I decided to go with a more modular design so future upgrades only required minimal parts design/swap. This is the fruit of…
Discover the Ultimate Stealthburner UHF! Are you searching for a Stealthburner UHF that perfectly integrates with your Rapido 2 setup and has room for everything you need—like the 3DO-Nozzle Cam V2 with LED, CPAP, Knomi V2, and of course,…
Rapidburner HF/UHF s magnetickým držákem krytu Pro neodymové N52 kruhové magnety 6x3mm Koukněte i na mé další modely . Pokud mě chcete podpořit, můžete zde: PayPal , BuyMeACofee , QRCode . Děkuji
I have modified the original NG X carriage to mount the Xol toolhead while not losing any X or Y build volume and be as close as possible to the stock toolhead in terms of reach allowing (hopefully) full compatibility with tools mounted…
This remix aims to integrate the MK8 nozzle mounts into the X carriage itself instead of mounting them onto the existing X carriage of the Ender 3. Due to this, a linear rail is required to mount this variant. I may consider creating an…
This UHF/SO-239 mount is for cable management, or as an accessory to my FTM-6000 side covers. MLOK-compatible.
Please be sure to hit the like button as this really helps me out here! Also be sure to post a make too! Would love to see your prints & installs! Here's my remix of these awesome files from chirpy2605 to bring them all together in this…
It contains the toolhead plate, which should be milled from aluminum, as well as the modified printing part so that the Dragon UHF can be used together with the Beacon Probe. All other printed parts can continue to be used.
the horisontal toolboard mount is made to fit the high temp cable from 3DO 3DO High Temp USB A-C Cable for 3D Printing - FEP+Silicone ---------------------------------------------------------------------------------------------------- on…
A modified left mount that fits the BLTouch/probe on the inside of the mount. This reduces the distance from the nozzle, decreasing the x/y runoff needed to probe the whole bed. x_offset: -20 y_offset: -17
I bought this cnc x carriage https://www.etsy.com/listing/1639526932/super-lightweight-carriage-for-voron because the dragon uhf made my plastic x carriage heat sets fall out due to the plastic mount softening up from the heat. I also…
A desk holder for all those connectors laying around. Holds 9 SO-239 Connectors.
I ran into the problem that the ABL mount designed by Jonspaceharper works great for mounting the eddy coil with none UHF hotends. The distance from the bed was to large to be effective when running the Dragon UHF hotend. This was modeled…
It's a remix of the tap that Chipry already modified, but for his Yavoth version of the UHF Dragon plus 5mm, that tap model wasn't useful, so all I've done is modify the tap height to fit the Yavoth toolhead. The only thing you'll lose is…
It is recommended to use it with the new super powerful D3vil Design Typhoon 5015 fan : https://www.aliexpress.com/item/3256808498095211.html
Mounting the eddy, you will need 2xM3x6 bolt, and be careful because they are self-tapping in the plastic Eddy is mounted so that the sensor is just 2.5mm above the bed with the scanning, if you want to modify it, keep in mind the…
Mounts a BIQU Microprobe to E34M1 using any UHF-length + single 5015 fan setup. There are a couple other options out there but I don't like the probe being right up in the front. If you're using a non-UHF setup then this will be too long.…
Lowered the mounting holes since the original mounts lowest holes had it 3.7mm away from the nozzle now its a perfect 2!
General Capsules for protecting N and UHF connectors. N(Male) N(Female) UHF(Male) - PL259 UHF(Female) - SO239 Connector type is written on side and gender on end. Printing Print with PLA or elastic TPA. Attached 3MF file has been prepared…
A mount for the Phaetus Dragon UHF for hartk's AntHead toolhead, as I wasn't able to find one and the one for the Dragon Ace makes the UHF stick out by 3mm.
just a simple remake, made with ABS at 45% infill and 5 walls and 5 top and bottom
This is a modified mount designed to let you use the stock Voron 2.4 XY endstop locations with the XOL toolhead. It’s based on the BTT Eddy UHF sensor mount for XOL, but enlarged to ensure proper alignment and contact with the stock X…
Ender7 carrige replacement for anthead UHF version. does not work with original toolhead hardware! You should be able to use any extruder mount but i made one special for LGX lite that fits the rest of the design. STEP file included so…
Simple rapidburner mount for ridgid cartographer probe. you need no special parts for this. Offsets are: x_offset: 0 y_offset: 28
Holder for Rapido ace UHF hotend from triangle labs. Great performing hotend IMHO. Printing: ASA/ABS same as Nadir recommends for xenomorph toolhead Infill: 30% gyroid Perimeters: 4 Top Layers: 5 Bottom Layers: 5 Layer Height: 0.2mm…
This is a modded SB Rapido Rear for a Carto/CNC Metal Bracket for VORON 2.4/Trident. I have removed the mounting slots and added eyes to the body. Now, when you are working on the toolhead, the SB assembly can not accidentally fall from…
Description This is a custom X-carriage designed specifically for the BigTreeTech Eddy Bed Level Sensor , based on the original Voron 2.4 X-carriage . Instead of the standard probe mount slots, this remix uses insert nut positions ,…
Description Language: DE, ENG, FR, CZ Configurable: YES CAD Program: FreeCAD DE Bei diesem Modell handelt es sich um ein Handschuhfach für einen Kubota B1 Traktor. Das Handschuhfach wird am Überrollbügel (ROPS) befestigt. Die Box ist groß…
Print with UV-stable filament (e.g. ASA) for outdoor use. I used 0.16mm resolution to get good threading. Depending on your printer, you might have to enable and adjust internal compensation when slicing.
UHF Panel for F-16 , pcb files are available here https://github.com/Bacon8tor/Bacons_F16_Panels/tree/main . The text is not include as I use my CO2 laser to engrave the text . You can also use onshape to edit this that link is here…
XOL-Metrix Rapido HF HE-Mount with 30mm hotend-fan
This needs another 2mm for the Rapido UHF after testing. I will update soon, but 13.5mm is not the number. Also, the bracket shown in the picture is not mine. I simply showed it for reference as it is the bracket I chose for the ADXL345…
Welcome to XOL-Metrix UHF for the SV08 ###### Please post your Makes ###### Please like this, download and post the make if you built it It helps us makers with feedback and gets us some Prusa meters as most people don't pay it forward…
You can print two of this to support the antenna. The filament is pet G.
Mount for Biqu Microprobe Made for the Rapid Burner toolhead https://github.com/chirpy2605/voron/tree/main/V0/Rapid_Burner Designed for cw2/sb carriages. Other UHF toolheads should be compatible (a4t, stealthburner remixes etc.) but…
Beim Core One lasse ich 2x den Druck stoppen um einen Farbwechsel zu machen.
Dragon UHF with a 40mm fan duct with HEX-NUTS, not heatserts mainly for the printed vzbot. I printed it in resin like I do for most of my printer parts normally. GPT tells me it's better not to cut vent holes on the sides so that more air…
added a bit of clearance for the bolts on the E34M1 hotend mount, as i had to break off a smidge on my print of the original added the slots for some vertical adjustment Print either as provided with supports, or with the toolhead-side…
-Under stearing column UHF mount for XRS -GME switch spacer
Belt clip broke on your Digitech 5W UHFA? No worries! here's a replacement. Just re-use the old steel pin and spring.
Remixed BLTouch/CRTouch mount to accommodate UHF-like hotends for the FrankEnstein V2 Toolhead. Lowered mount by 17mm. Used in conjunction with these ducts designed by wight554 and FrankEnstein V2 Dragon hotend mount for my Dragon UHF.…
A remix of sneakytreesnake cool crown cooler toolhead
Mount the Btt Eddy on the inside, see the picture for reference. Adjustable - works event for UHF mounts! The thickness of the case is around 1.2mm, and the best results are when it's mounted at 2.95mm. If mounting with the case, try…
Dräger UHF Applikator With the help of this applicator, the UHF tag is inserted into the sewn-in pocket of the special shoulder adjustment strap. (This shoulder adjustment strap replaces the standard strap of the Dräger PSS AirBoss.) To…
Extended length and camera body slot area to accomdate the adjustable focus 3DO camera.
In the title you cann read my config. Stock siboor aux are made for stock stealthburner, so i've modded the original for throwing aire in the right direction and not on the build plate. altready cutted for adding bed adesion
I am currently using a XOL toolhead with Chaotic lab TAP v2. The mount for the Eddy mount from the BTT github is out of the recommended height difference (2-3mm) between the nozzle tip and scanning surface of Eddy because i am using a…
Offset is -17.7mm for Carto V4, Beacon should be -1mm different from Speedy's model EDIT 12/28/2025: Fix Z offset to be between 2.6mm and 3.0mm
Soak the mold pieces in soapy water then assemble the mold. I held it shut with a small clamp but a zip tie would also work. Inject with rtv and let it cure 24 hrs. You can also fill the mold then insert the centre, top up the rtv and…
Ersatzgelenk für die Bosch Hartboden-Softdüse mit LED-Beleuchtung BHZUHFN. Kompatibel mit Unlimited 6,7 und 8. Es handelt sich um das Gelenk, welches für die Dreh- und Kippbewegung der Bürste zuständig ist. Aus Stabilitätsgründen, dass…
Smolboi's UAP Toolhead for Monolith with ECAS! This version is specific to Rapido2 UHF / Dragon UHF Hotends, This toolhead is designed for running toolhead wires to the MCU.... !!! NOT FOR USE WITH TOOLHEAD BOARDS !!! Additional info:…
1/12/2026 - Added a knurled cap as an alternative. Source files updated I wanted to add dust covers to a couple of projects so I drew this up. The model is threaded to screw on securely and includes a provision for tethering with a 3.2mm…
Planetary gear extruder have some COM problem, so i tried to fix the problems by lowering the motor and supporting it, so i have much less vibration and more accurate readings from the accelerometer. perhaps also compatible with other…
Modified Beacon RevH UHF mount for Cartographer V4 compatibility. The mounting point is shortened to clear electronic components on the Carto v4 PCB that would otherwise interfere with the original mount design. Perfect for Xol/A4T…
