Ender 5 Plus Sprite Pro Extruder Dragon UHF hot end solution
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modular setup for the Ender 5 Plus with Sprite Pro extruder and Dragon UHF hotend
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 217
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I recently upgraded to a Phateus Dragon UHF hotend and needed to change up my mounting system and cooling options. I decided to go with a more modular design so future upgrades only required minimal parts design/swap. This is the fruit of my labors.
The new design is based around a main mount that attaches to the stock hotend mounting location with two M3 screws. It has a mount built into it for a Sprite Pro extruder. A hotend mount is attached to the main body with two additional screws. This is currently made to fit a Phateus Dragon UHF hotend with the supplied M2 screws minus the hotend's bowden tube top. The hotend mount has an opening for an M6 bowden tube coupler.
The hotend cooler is secured to the main mount with four M3 screws. Currently there are four different hotend cooling options. One has just the hotend cooler fan mount while the other three include the a opening for a 4010 fan mount as well as an attached 5015 port for part cooling options.
The second parts cooling option mounts to the back side of the Sprite extruder using four M3 screws. This cooler is still being adjusted to get the best flow. The currently supplied parts cooler will function but I haven't reached my desired goal with it, yet.
Next up is a seperate BL Touch mount that attaches to the Z carriage with two M3 screws and nuts . It is slotted to allow for minor up and down adjustments.
Finally there is a simply M6 bowden tube coupler mount that attaches to the side of the Sprite Pro extruder that allows the stock bowden tube to placed into an M6 coupler giving you an option for securing the wires going up to the Z carriage.
10/12/25 - New Hotend mount, bltouch mount, and hotend cooler.
All the new parts files start with OT. The hotend mount and the hotend cooler have been clearanced to allow for easier routing of the thermister and heating cartridge wires. The BLtouch has been moved to mounting to the side of the hotend cooler.
All systems still use the original mainbody.stl. You can choose hotend mount, and bltouch mounts and parts cooler as you see fit.
This is still a work in progress but is fully functional and printing on my Ender 5 Plus presently.