BTT Eddy mount for E34M1 UHF hotends
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
BTT Eddy mount with vertical adjustment slots
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 227
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
added a bit of clearance for the bolts on the E34M1 hotend mount, as i had to break off a smidge on my print of the original
added the slots for some vertical adjustment
Print either as provided with supports, or with the toolhead-side mounts down and you can skip supports
V2: has further height adjustment if you need it. If not, use the original.
Nozzle offset is X=-33mm Y=-22mm, same as Joshua Y's model, as this is a literal remix of the STL.V2: has further height adjustment if you need it. If not, use the original.
Nozzle offset is X=-33mm Y=-22mm, same as Joshua Y's model, as this is a literal remix of the STL.