BTT Eddy mount for E34M1 UHF hotends
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
BTT Eddy mount with vertical adjustment slots
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 64
- Makes
- 0
- Views
- 227
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
added a bit of clearance for the bolts on the E34M1 hotend mount, as i had to break off a smidge on my print of the original
added the slots for some vertical adjustment
Print either as provided with supports, or with the toolhead-side mounts down and you can skip supports
V2: has further height adjustment if you need it. If not, use the original.
Nozzle offset is X=-33mm Y=-22mm, same as Joshua Y's model, as this is a literal remix of the STL.V2: has further height adjustment if you need it. If not, use the original.
Nozzle offset is X=-33mm Y=-22mm, same as Joshua Y's model, as this is a literal remix of the STL.