Eddy Coil EVA E34M1 Dragon UHF Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This probe mount was design for the BTT eddy coil on the EVA E34M1 while using the Phaetus Dragon UHF
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 62
- Wydruki
- 1
- Wyświetlenia
- 573
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I ran into the problem that the ABL mount designed by Jonspaceharper works great for mounting the eddy coil with none UHF hotends. The distance from the bed was to large to be effective when running the Dragon UHF hotend. This was modeled to have the proper distance from the bed when the tip of the nozzle is touching the bed, which is between 2-3mm. The probe is also shifted forward of the nozzle. The offset from the center of the nozzle to the center of the proble is X=-33mm Y=-22mm.
This probe mount will work with the Kraken UHF duct and the Stock Bihorn UHF duct. I have not tested it with the Trihorn UHF duct.
THe mount is designed for m3 x 4 x 4 heat inserts to attach the eddy probe.